A5947GETTR-T集成電路（IC）的電機驅動器控制器規格書PDF中文資料

A5947GETTR-T屬于集成電路（IC）的電機驅動器控制器。由Allegro MicroSystems制造生產的A5947GETTR-T電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。

FEATURES AND BENEFITS

Speed curve configuration via EEPROM

? I2C serial port

? Sinusoidal modulation for reduced audible noise and

low vibration

? Sensorless (no Hall sensors required)

? Low RDS(ON) power MOSFETs

? 3.3 V / 20 mA linear regulator

? PWM or analog speed input

? FG speed output

? Slew rate control

? Lock detection

? Soft start

? Low power standby mode

? Overcurrent protection

? Overvoltage protection

DESCRIPTION

The A5947G three phase motor driver IC incorporates sensorless

sinusoidal drive to minimize vibration for a wide variety of

fan applications. Sensorless control eliminates the requirement

for Hall sensors.

A flexible closed-loop speed control system is integrated into

the IC. EEPROM is used to tailor the common functions of the

fan speed curve to a specific application. This eliminates the

requirement for a microprocessor-based system and minimizes

programming requirements.

The A5947G is available in a 28-contact 5 mm × 5 mm QFN

with exposed thermal pad (suffix ET) and a 20-lead TSSOP

with exposed thermal pad (suffix LP).