ACH16244DGG中文資料飛利浦數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

The 74ALVC16244(74ALVCH16244) is a 16-bit non-inverting buffer/line driver with 3-State outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3-State outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state.

The 74ALVCH16244 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.

The 74ALVC16244 has 5V tolerant inputs.

FEATURES

? Wide supply voltage range of 1.2V to 3.6V

? Complies with JEDEC standard no. 8-1A

? CMOS low power consumption

? MULTIBYTETM flow-through standard pin-out architecture

? Low inductance multiple VCC and GND pins for minimum noise and ground bounce

? Direct interface with TTL levels

? Bus hold on data inputs (74ALVCH16244 only)

? Output drive capability 50? transmission lines @ 85°C

? Current drive ±24 mA at 3.0 V