AD5274集成電路（IC）的數字電位計規格書PDF中文資料

AD5274屬于集成電路（IC）的數字電位計。由亞德諾半導體技術有限公司制造生產的AD5274數字電位計數字電位器是一系列集成電路器件，可提供類似于傳統機械電位器或變阻器的可調節電阻，但通過電子信號而非機械輸入來進行控制。雖然這些器件的電阻可耗散的電能相對有限，但其電子控制能力有助于小型化、自動化和遠程控制信號級模擬電路，而這些電路本來可能會使用機械電位器。

GENERAL DESCRIPTION

The AD5272/AD52741 are single-channel, 1024-/256-position digital rheostats that combine industry leading variable resistor performance with nonvolatile memory (NVM) in a compact package.

The AD5272/AD5274 ensure less than 1 end-to-end resistor tolerance error and offer 50-times programmable (50-TP) memory. The guaranteed industry leading low resistor tolerance error feature simplifies open-loop applications as well as precision calibration and tolerance matching applications.

The AD5272/AD5274 device wiper settings are controllable through the I2C-compatible digital interface. Unlimited adjustments are allowed before programming the resistance value into the 50-TP memory. The AD5272/AD5274 do not require any external voltage supply to facilitate fuse blow and there are 50 opportunities for permanent programming. During 50-TP activation, a permanent blow fuse command freezes the wiper position (analogous to placing epoxy on a mechanical trimmer).

The AD5272/AD5274 are available in a 3 mm × 3 mm 10-lead LFCSP package and in a 10-lead MSOP package. The parts are guaranteed to operate over the extended industrial temperature range of ?40°C to +125°C.

FEATURES

Single-channel, 1024-/256-position resolution

20 kΩ, 50 kΩ, 100 kΩ nominal resistance

Maximum ±1 nominal resistor tolerance error

50-times programmable (50-TP) wiper memory

Rheostat mode temperature coefficient: 5 ppm/°C

2.7 V to 5.5 V single-supply operation

±2.5 V to ±2.75 V dual-supply operation for ac or bipolar operations

I2C-compatible interface

Wiper setting readback

Power on refreshed from 50-TP memory

Thin LFCSP 10-lead, 3 mm × 3 mm × 0.8 mm package

Compact MSOP, 10-lead 3 mm × 4.9 mm × 1.1 mm package

APPLICATIONS

Mechanical rheostat replacements

Op-amp: variable gain control

Instrumentation: gain, offset adjustment

Programmable voltage to current conversions

Programmable filters, delays, time constants

Programmable power supply

Sensor calibration