AD596集成電路（IC）的熱管理規格書PDF中文資料

AD596屬于集成電路（IC）的熱管理。由亞德諾半導體技術有限公司制造生產的AD596熱管理熱管理 IC 是根據溫度控制電路電源的半導體器件。這些 IC 的功能包括風扇控制、硬件監控器、溫度監控系統、熱監控器、熱電偶放大器、熱電偶調節器和溫度計–溫控器。檢測溫度范圍為 -260℃ 至 +1800℃，輸出類型有 I2C、SMBus、低電平有效/高電平有效、模擬電壓、開漏、PWM、SPI、2 線串行和并行–串行。

GENERAL DESCRIPTION

The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal signal proportional to temperature. The internal signal is then compared with an externally applied setpoint voltage to yield a low impedance switched output voltage. Dead-Band or switching hysteresis can be programmed using a single external resistor. Alternately, the AD596/AD597 can be configured to provide a voltage output (10 mV/°C) directly from a type J or K thermocouple signal. It can also be used as a standalone voltage output temperature sensor.

FEATURES

Low Cost

Operates with Type J (AD596) or Type K (AD597) Thermocouples

Built-In Ice Point Compensation

Temperature Proportional Operation – 10 mV/8C

Temperature Setpoint Operation – ON/OFF

Programmable Switching Hysteresis

High Impedance Differential Input