ADN4667ARUZ-REEL7集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ADN4667ARUZ-REEL7屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的ADN4667ARUZ-REEL7驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

GENERAL DESCRIPTION

The ADN4667 is a quad, CMOS, low voltage differential signaling (LVDS) line driver offering data rates of over 400 Mbps (200 MHz) and ultralow power consumption. It features a flow through pinout for easy PCB layout and separation of input and output signals.

The device accepts low voltage TTL/CMOS logic signals and converts them to a differential current output of typically ±3.1 mA for driving a transmission medium such as a twisted pair cable. The transmitted signal develops a differential voltage of typi-cally ±310 mV across a termination resistor at the receiving end. This is converted back to a TTL/CMOS logic level by an LVDS receiver, such as the ADN4668.

The ADN4667 also offers active high and active low enable/ disable inputs (EN and EN). These inputs control all four drivers and turn off the current outputs in the disabled state to reduce the quiescent power consumption to typically 10 mW.

The ADN4667 and its companion LVDS receiver, the ADN4668, offer a new solution to high speed, point-to-point data trans-mission, and a low power alternative to emitter-coupled logic ECL) or positive emitter-coupled logic (PECL).

FEATURES

±15 kV ESD protection on output pins

400 Mbps (200 MHz) switching rates

Flow through pinout simplifies PCB layout

300 ps typical differential skew

400 ps maximum differential skew

1.7 ns maximum propagation delay

3.3 V power supply

±310 mV differential signaling

Low power dissipation (10 mW typical)

Interoperable with existing 5 V LVDS receivers

High impedance on LVDS outputs on power-down

Conforms to TIA/EIA-644 LVDS standards

Industrial operating temperature range: ?40°C to +85°C

Available in surface-mount (SOIC) and low profile

TSSOP package

Qualified for automotive applications

APPLICATIONS

Backplane data transmission

Cable data transmission

Clock distribution