ADXL345傳感器變送器的運動傳感器-加速計規格書PDF中文資料

ADXL345屬于傳感器變送器的運動傳感器-加速計。由亞德諾半導體技術有限公司制造生產的ADXL345運動傳感器 - 加速計加速度計用于檢測并響應運動或振動等加速度的變化。加速度計類型有 X、Y 或 Z 軸上的模擬或數字加速度計，加速度范圍為 ±0.5 g 至 ±2000 g，靈敏度為 1 至 500 k (LSB/g)，輸出類型有模擬電壓、藍牙、數字、DSI、IEPE、I2C、PCM、PWM、射頻和 SPI。

GENERAL DESCRIPTION

The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.

The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°.

FEATURES

Ultralow power: as low as 23 μA in measurement mode and

0.1 μA in standby mode at VS = 2.5 V (typical)

Power consumption scales automatically with bandwidth

User-selectable resolution

Fixed 10-bit resolution

Full resolution, where resolution increases with g range,

up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB

scale factor in all g ranges)

Embedded memory management system with FIFO

technology minimizes host processor load

Single tap/double tap detection

Activity/inactivity monitoring

Free-fall detection

Supply voltage range: 2.0 V to 3.6 V

I/O voltage range: 1.7 V to VS

SPI (3- and 4-wire) and I2C digital interfaces

Flexible interrupt modes mappable to either interrupt pin

Measurement ranges selectable via serial command

Bandwidth selectable via serial command

Wide temperature range (?40°C to +85°C)

10,000 g shock survival

Pb free/RoHS compliant

Small and thin: 3 mm × 5 mm × 1 mm LGA package

APPLICATIONS

Handsets

Medical instrumentation

Gaming and pointing devices

Industrial instrumentation

Personal navigation devices

Hard disk drive (HDD) protection