AT93C46D-PU集成電路（IC）的存儲(chǔ)器規(guī)格書PDF中文資料

Features

Low-voltage Operation

? VCC = 1.8V to 5.5V

User-selectable Internal Organization

? 1K: 128 x 8 or 64 x 16

3-wire Serial Interface

2MHz Clock Rate (5V)

Self-timed Write Cycle (5ms Max)

High Reliability

? Endurance: 1,000,000 Write Cycles

? Data Retention: 100 Years

8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, 8-lead PDIP, and

8-ball VFBGA Packages

Description

The Atmel? AT93C46D provides 1,024 bits of Serial Electrically Erasable

Programmable Read-Only Memory (EEPROM) organized as 64 words of 16 bits

each (when the ORG pin is connected to VCC) and 128 words of 8 bits each (when

the ORG pin is tied to ground). The device is optimized for use in many industrial

and commercial applications where low-power and low-voltage operations are

essential. The AT93C46D is available in space-saving 8-lead JEDEC SOIC,

8-lead TSSOP, 8-pad UDFN, 8-lead PDIP, and 8-ball VFBGA packages.

The AT93C46D is enabled through the Chip Select pin (CS) and accessed via a

3-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift

Clock (SK). Upon receiving a Read instruction at DI, the address is decoded, and

the data is clocked out serially on the DO pin. The write cycle is completely

self-timed, and no separate erase cycle is required before Write. The write cycle is

only enabled when the part is in the Erase/Write Enable state. When CS is

brought high following the initiation of a write cycle, the DO pin outputs the

Ready/Busy status of the part.

The AT93C46D operates from 1.8V to 5.5V.