ATMEGA32C1

8-bit Microcontroller with 16K/32K/64K Bytes In-System Programmable Flash

Overview TheATmega16/32/64/M1/C1isalow-powerCMOS8-bitmicrocontrollerbasedontheAVRenhancedRISCarchitecture.Byexecutingpowerfulinstructionsinasingleclockcycle,theATmega16/32/64/M1/C1achievesthroughputsapproaching1MIPSperMHzallowingthesystemdesignertooptimizepo

ATMEGA32C1

8-bit AVR MCU; ·High performance, low power AVR? 8-bit microcontroller·Advanced RISC architecture\n·131 powerful instructions - most single clock cycle execution\n·32x8 general purpose working registers\n·Fully static operation\n·Up to 1MIPS throughput per MHz\n·On-chip 2-cycle multiplier;

The high-performance, low-power Microchip 8-bit AVR? RISC-based microcontroller combines 32 KB ISP Flash memory with read-while-write capabilities, 1 KB EEPROM, 2 KB SRAM, 27 general purpose I/O lines, 32 general purpose working registers, two flexible timer/counters with compare modes and PWM, UART with HW LIN, 11-channel 10-bit A/D converter with two differential programmable gain input stages, 10-bit D/A converter, programmable watchdog timer with an internal individual oscillator, SPI serial port, on-chip debug system, and four software selectable power saving modes. The device operates between 2.7-5.5 volts.By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching one MIPS per MHz, balancing power consumption and processing speed.

ATmega32C1

8-bit Microcontroller with 16K/32K/64K Bytes In-System Programmable Flash

ATMEGA32C1

Automotive Specification at 150?C

ATmega32C1

Atmel? AVR? 32-bit microcontrollers

ATMEGA32C1-AUTOMOTIVE

8bit AVR microcontroller; ·High performance, low power AVR? 8-bit microcontroller·Advanced RISC architecture\n·131 powerful instructions - most single clock cycle execution\n·32x8 general purpose working registers\n·Fully static operation\n·Up to 1MIPS throughput per MHz\n·On-chip 2-cycle multiplier;

The high-performance, low-power Microchip 8-bit AVR RISC-based microcontroller combines 32KB ISP flash memory with read-while-write capabilities, 1KB EEPROM, 2KB SRAM, 27 general purpose I/O lines, 32 general purpose working registers, two flexible timer/counters with compare modes and PWM, UART with HW LIN, 11-channel 10-bit A/D converter with two differential programmable gain input stages, 10-bit D/A converter, programmable watchdog timer with internal individual oscillator, SPI serial port, on-chip debug system, and four software selectable power saving modes. The device operates between 2.7-5.5 volts.\nBy executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.