CH7211A-BFK中文資料Chrontel數據手冊PDF規格書

FEATURES GENERAL DESCRIPTION

? Compliant with DisplayPort Alternate Mode on USB

Type C standard

? Compliant with DisplayPort Specification version 1.3

and Embedded DisplayPort (eDP) Specification version

1.4

? Support up to 4 Main Link Lanes at 1.62Gbps,2.7Gbps

(HBR) or 5.4Gbps (HBR2) link rate

? Automotive DP input signal detection and Lane swap

supported for compliance with the USB type C cable

plug orientation switch

? DP_BR signaling modes supported

? Programmable DisplayPort receiver equalization

supported for the compensation of input signal

attenuation

? Support Spread Spectrum Clocking (de-spreading) for

EMI reduction

? Support Fast and full Link Training

? Support eDP Authentication: Alternative Scramble Seed

Reset and Alternative Framing

? HDMI transmitter compliant with HDMI specification

version 2.0 and DVI specification version 1.0

? HDMI transmitter supports up to 6.0Gbps data rate for

video timing of 4Kx2K@60Hz

? HDMI 3D dual view and 3D audio are supported

? High-Dynamic-Range (HDR) display are supported

? YCC 4:4:4/4:2:2 to YCC 4:2:2/4:2:0,Y-only(Gray

display) conversion are supported

? HDCP engine compliant with HDCP 2.2 specification

with internal HDCP Keys

? HDCP 2.2 repeater supported

? Active DDC buffer and related control register

integrated

? SCDC supported on HDMI DDC

? IIC-over-AUX transaction supported

? CEC tunneling over AUX is supported

? AUX CH polarity inversion supported for USB type C

cable plug orientation switch

? Programmable Pre-Emphasis on output driver supported

? Support 2 USB Type-C ports that are compliant with

USB Type-C Cable and Connector Specification

revision 1.3.

? Compliant with USB Power Delivery Specification

Revision 3.0, Version 1.1, with USB Power Delivery

BMC transceiver integrated on each USB Type-C port

? Integrated Ra, Rd and Rp for USB Type-C

? On-chip Audio Decoder which support 8 channel Audio

input from DP Rx and output from HDMI Tx with

sample rate up to 192KHz

? SPDIF/IIS input supported with audio sampling rate up

to 192KHz

? Embedded MCU to handle the control logic

? Full speed USB billboard module integrated

? USB 2.0 PHY supported with internal switch for

Chrontel’s CH7211A is a low-cost, low-power

semiconductor device that translates the DisplayPort

signal to HDMI/DVI through the USB Type-C connector.

This innovative USB Type-C based DisplayPort receiver

with an integrated HDMI Transmitter is specially

designed to target the USB Type-C to HDMI converter,

adopter and docking device. Through the CH7211A’s

advanced decoding / encoding algorithm, the input

DisplayPort high-speed serialized multimedia data can be

seamlessly converted to HDMI/DVI output.

The CH7211A’s DP/eDP receiver is compliant with the

DisplayPort Specification 1.3 and Embedded DisplayPort

(eDP) Specification version 1.4. With sophisticated

DisplayPort signal detection and the Lane Swap/AUX

polarity inversion logic, the CH7211A supports USB

Type-C cable plug orientation switch. With internal

HDCP key Integrated, the device support HDCP 2.2

specifications. In the device’s receiver block, which

supports four DisplayPort Main Link Lanes input with

data rate running at 1.62Gbps, 2.7Gbps or 5.4Gbps, and

converted the input signal to HDMI output up to

4Kx2k@60Hz. Leveraging the USB Power Delivery

control logic, the USB billboard module for USB device

indentify and DisplayPort’s unique source/sink “Link

Training” routine, the CH7211A is capable of instantly

bring up the video display to the HDMI/DVI TV/Monitor

when the initialization process is completed.

The CH7211A also supports up to 8-channel audio input

from either DP Rx or SPDIF port and output from HDMI

Tx with sample rate up to 192 KHz. Available audio

bandwidth depends on the pixel clock frequency, the

video format timing, and whether or not content

protection re-synchronization is needed.

With sophisticated MCU and the embedded EEPROM,

CH7211A support auto-boot and EDID buffer.

Leveraging the firmware auto-loaded from the embedded

EEPROM, CH7211A can support DP input detection,

HDMI connection detection, and determine to enter into

Power saving mode automatically.

data/file transport in USB full speed mode

? Embedded EEPROM, integrated EDID Buffer

? IIC Slave, USB 2.0 are available for firmware update

? IIC slave interface are available for debug

? Support Auto Power Saving mode and low stand-by

current

? Anti-back drive support

? Low power architecture

? RoHS compliant and Halogen free package

? HBM 2KV ESD performance

? Offered in 64 pin QFN package

APPLICATION

? USB Type C to HDMI 2.0 cable/Adapter/Docking

Station

? On-board DP to HDMI 2.0 application

? USB Type-C Monitor/Projector/Display