D1063中文資料GMI數(shù)據(jù)手冊PDF規(guī)格書

General Description:

The single channel DIN Rail Load Cell/Strain Gauge Bridge Isolating Repeater D1063S

acts as a transparent galvanic isolated interface installed between a weighing indicator

in Safe Area and a load cell (or group of load cells) in Hazardous Area;

it appears at the terminals of the indicator as a single load cell equivalent to the one

in the field. Provides a fully floating power supply voltage with remote sensing capability

to load cell located in Hazardous Area and repeats, while isolating, the mV signal output

to drive a load in Safe Area depending on the host system reference voltage.

Up to four 350 Ω load cells, or six 450 Ω load cells, or twelve 1000 Ω load cells can

connected in parallel.

Voltage reference (Safe Area side) is DIP switch configurable to select internal or

external (host system) supply. In addition a field wiring fault red LED indicates any

wire break in the Hazardous Area side.

Features:

Input from Zone 0 (Zone 20), Division 1,

installation in Zone 2, Division 2.

Strain Gauge Bridge Transparent Repeater.

to four 350 Ω load cells in parallel or

to six 450 Ω load cells in parallel or

to twelve 1000 Ω load cells in parallel.

Broken field wire fault detection.

High Accuracy.

Three port isolation, Input/Output/Supply.

EMC Compatibility to EN61000-6-2, EN61000-6-4.

field programmability by DIP switch.

ATEX, IECEx, FM & FM-C, Russian

Certifications.

Type Approval Certificate DNV and KR for

maritime applications.

High Reliability, SMD components.

Simplified installation using standard

DIN Rail and plug-in terminal blocks.

250 Vrms (Um) max. voltage allowed to the

instruments associated with the barrier.