DAC7611UB/2K5集成電路（IC）的數模轉換器（DAC）規格書PDF中文資料

DAC7611UB/2K5屬于集成電路（IC）的數模轉換器（DAC）。由美國德州儀器公司制造生產的DAC7611UB/2K5數模轉換器（DAC）數模轉換器（DAC、D/A、D2A 或 D 轉 A）可將數字信號轉換為緩沖或無緩沖的模擬電壓或電流。DAC 架構是否適合特定應用，要取決于分辨率和采樣頻率。DAC 通常用于音樂播放器，將數字數據流轉換為模擬音頻流。它們還用于電視和手機，將數字視頻數據轉換為模擬視頻信號，再連接到屏幕驅動器，以顯示單色或彩色圖像。

FEATURES

LOW POWER: 2.5mW

FAST SETTLING: 7ms to 1 LSB

1mV LSB WITH 4.095V FULL-SCALE

RANGE

COMPLETE WITH REFERENCE

12-BIT LINEARITY AND MONOTONICITY

OVER INDUSTRIAL TEMP RANGE

ASYNCHRONOUS RESET TO 0V

3-WIRE INTERFACE: Up to 20MHz Clock

ALTERNATE SOURCE TO DAC8512

APPLICATIONS

PROCESS CONTROL

DATA ACQUISITION SYSTEMS

CLOSED-LOOP SERVO-CONTROL

PC PERIPHERALS

PORTABLE INSTRUMENTATION

DESCRIPTION

The DAC7611 is a 12-bit digital-to-analog converter

(DAC) with guaranteed 12-bit monotonicity performance

over the industrial temperature range. It requires

a single +5V supply and contains an input shift

register, latch, 2.435V reference, DAC, and high speed

rail-to-rail output amplifier. For a full-scale step, the

output will settle to 1 LSB within 7ms. The device

consumes 2.5mW (0.5mA at 5V).

The synchronous serial interface is compatible with a

wide variety of DSPs and microcontrollers. Clock

(CLK), serial data in (SDI), and load strobe (LD)

comprise the serial interface. In addition, two control

pins provide a chip select (CS) function and an asynchronous

clear (CLR) input. The CLR input can be

used to ensure that the DAC7611 output is 0V on

power-up or as required by the application.

The DAC7611 is available in an 8-lead SOIC or 8-pin

plastic DIP package and is fully specified over the

industrial temperature range of –40°C to +85°C.