DS_S1T8528X01中文資料三星數(shù)據(jù)手冊PDF規(guī)格書

INTRODUCTION

S1T8528 is a 1 CHIP RF IC which can be used in high performance CTO CLP systems at max. 60MHz. S1T8528 is designed to include a receiver, PLL and COMPANDER to minimize PCB space requirements. Improved RX characteristics such as inter-modulation, spurious response and adjacent channel interface have been included to satisfy the universal standards.

The 1 CHIP RF IC has considerably reduced the cost by including a build-in 1’st mixer, low battery detector, fMCU, RSSI, RF regulator and speaker amp. Also, it fulfills carrier detector threshold control, speaker volume control, operating mode selection and MUTE function using S/W, thus making external application easier.

FEATURES

? Operating voltage range: 2.0V ~ 5.5V

? Typical supply current: 8.9mA at 3.6V

? Built-in low battery detection function ( selectable 3.45V, 3.3V, 3.0V, 2.2V, 2.1V )

? Built-in speaker volume control and speaker amplifier

? Built-in splatter filter

? Support mode selection ( Active, Rx, Standby and Inactive mode )

? FM Receiver

— Excellent Receiver characteristics

— RSSI ( Linear ) and Carrier detector output ( Digital ) function

? Compander

— Easy gain control and application using external component

— -Included ALC (Automatic Level Control) circuit

? Universal PLL

— RX (TX) divided counter range : 1/16 ~ 1/16383

— Reference frequency divided counter range : 1/16 ~ 1/4095

— Lock detector signal output

— Serial interface with MICOM for controlling each block

— Clock Output for MICOM oscillator substitution. ( X-tal divided clock by 2, 3, 4 and 5 )