DSP56002中文資料摩托羅拉數據手冊PDF規格書

The DSP56002 and the DSP56L002 are MPU-style general purpose Digital Signal Processors (DSPs), composed of an efficient 24-bit digital signal processor core, program and data memories, various peripherals, and support circuitry.

DSP56002/L002 Features

Digital Signal Processing Core

? Efficient, object code compatible, 24-bit 56000-Family DSP engine

— Up to 33 Million Instructions Per Second (MIPS) – 30.3 ns instruction cycle at 66 MHz

— Up to 198 Million Operations Per Second (MOPS) at 66 MHz

— Performs a 1024-point complex Fast Fourier Transform (FFT) in 59,898 clocks

— Highly parallel instruction set with unique DSP addressing modes

— Two 56-bit accumulators including extension byte

— Parallel 24 × 24-bit multiply-accumulate in 1 instruction cycle (2 clock cycles)

— Double precision 48 × 48-bit multiply with 96-bit result in 6 instruction cycles

— 56-bit Addition/Subtraction in 1 instruction cycle

— Fractional and integer arithmetic with support for multiprecision arithmetic

— Hardware support for block-floating point FFT

— Hardware nested DO loops

— Zero-overhead fast interrupts (2 instruction cycles)

— Four 24-bit internal data buses and three 16-bit internal address buses for maximum information transfer on-chip

Memory

? On-chip Harvard architecture permitting simultaneous accesses to program and two data memories

? 512 × 24-bit on-chip program RAM and 64 × 24-bit bootstrap ROM

? Two 256 × 24-bit on-chip data RAMs

? Two 256 × 24-bit on-chip data ROMs containing sine, A-law and μ-law tables

? External memory expansion with 16-bit address and 24-bit data buses

? Bootstrap loading from external data bus, Host Interface, or Serial Communications Interface

Peripheral and Support Circuits

? Byte-wide Host Interface (HI) with direct memory access support

? Synchronous Serial Interface (SSI) to communicate with codecs and synchronous serial devices

— Up to 32 software-selectable time slots in network mode

? Serial Communication Interface (SCI) for full-duplex asynchronous communications

? 24-bit Timer/Event Counter also generates and measures digital waveforms

? On-chip peripheral registers memory mapped in data memory space

? Double buffered peripherals

? Up to 25 general purpose I/O (GPIO) pins

? Three external interrupt request pins; one non-maskable

? On-Chip Emulation (OnCE) port for unobtrusive, processor speed-independent debugging

? Software-programmable, Phase-Locked Loop-based (PLL) frequency synthesizer for the core clock

? Power-saving Wait and Stop modes

? Fully static, HCMOS design for operating frequencies from 66 MHz or 40 MHz down to DC

? 132-pin Ceramic Pin Grid Array (PGA) package; 13 × 13 array

? 132-pin Plastic Quad Flat Pack (PQFP) surface-mount package; 24 × 24 × 4 mm

? 144-pin Thin Quad Flat Pack (TQFP) surface-mount package; 20 × 20 × 1.4 mm

? 3.3 V (DSP56L002) and 5 V (DSP56002) Power supply options