DSP56156FE40中文資料摩托羅拉數(shù)據(jù)手冊PDF規(guī)格書

The DSP56156 is a general-purpose MPU-style Digital Signal Processor (DSP). On a single semiconductor chip, the DSP56156 comprises a very efficient 16-bit digital signal processing core, program and data memories, a number of peripherals, and system support circuitry. Unique features of the DSP56156 include a built-in sigma-delta (2y) codec and phase-locked loop (PLL). This combination of features makes the DSP56156 a cost-effective, high-performance solution for many DSP applications, especially speech coding, digital communications, and cellular base stations.

DSP56156 Features

Digital Signal Processing Core

? Efficient, object code compatible, 16-bit 56100-Family DSP engine

— Up to 30 Million Instructions Per Second (MIPS) – 33 ns instruction cycle at 60 MHz

— Up to 180 Million Operations Per Second (MOPS) at 60 MHz

— Highly parallel instruction set with unique DSP addressing modes

— Two 40-bit accumulators including extension byte

— Parallel 16 × 16-bit multiply-accumulate in 1 instruction cycle (2 clock cycles)

— Double precision 32 × 32-bit multiply with 72-bit result in 6 instruction cycles

— Least Mean Square (LMS) adaptive loop filter in 2 instructions

— 40-bit Addition/Subtraction in 1 instruction cycle

— Fractional and integer arithmetic with support for multiprecision arithmetic

— Hardware support for block-floating point FFT

— Hardware-nested DO loops including infinite loops

— Zero-overhead fast interrupts (2 instruction cycles)

— Three 16-bit internal data buses and three 16-bit internal address buses for maximum information transfer on-chip

Memory

? On-chip Harvard architecture permitting simultaneous accesses to program and memories

? 2048 × 16-bit on-chip program RAM and 64 × 16-bit bootstrap ROM (or 12 k × 16-bit on-chip program ROM on the DSP56156ROM)

? 2048 × 16-bit on-chip data RAM

? External memory expansion with 16-bit address and data buses

? Bootstrap loading from external data bus, Host Interface, or Synchronous Serial Interface

Peripheral and Support Circuits

? Byte-wide Host Interface (HI) with Direct Memory Access support

? Two Synchronous Serial Interfaces (SSI) to communicate with codecs and synchronous serial devices

— Built in μ-law and A-law compression/expansion

— Up to 32 software-selectable time slots in network mode

? 16-bit Timer/Event Counter also generates and measures digital waveforms

? On-chip sigma-delta voice band Codec:

— Sampling clock rates between 100 kHz and 3 MHz

— Four software-programmable decimation/interpolation ratios

— Internal voltage reference ( 2/5 of positive power supply)

— No external components required

? On-chip peripheral registers memory mapped in data memory space

? Double buffered peripherals

? Up to 27 general purpose I/O pins

? Two external interrupt request pins

? On-Chip Emulation (OnCE?) port for unobtrusive, processor speed-independent debugging

? Software-programmable, Phase-Locked Loop-based (PLL) frequency synthesizer for the core clock

Miscellaneous Features

? Power-saving Wait and Stop modes

? Fully static, HCMOS design for operating frequencies from 40 or 60 MHz down to DC

? 112-pin Ceramic Quad Flat Pack (CQFP) surface-mount package; 20 × 20 × 3 mm

? 112-pin Plastic Thin Quad Flat Pack (TQFP) surface-mount package; 20 × 20 × 1.5 mm

? 5 V power supply