DSP56321中文資料恩XP數(shù)據(jù)手冊PDF規(guī)格書

Features

High-Performance

DSP56300 Core

? 275 million multiply-accumulates per second (MMACS) (550 MMACS using the EFCOP in filtering

applications) with a 275 MHz clock at 1.6 V core and 3.3 V I/O

? Object code compatible with the DSP56000 core with highly parallel instruction set

? Data arithmetic logic unit (Data ALU) with fully pipelined 24 × 24-bit parallel Multiplier-Accumulator (MAC),

56-bit parallel barrel shifter (fast shift and normalization; bit stream generation and

parsing), conditional

ALU instructions, and 24-bit or 16-bit arithmetic support under software control

? Program control unit (PCU) with position independent code (PIC) support, addressing modes optimized for

DSP applications (including immediate offsets), internal instruction cache controller, internal memoryexpandable

hardware stack, nested hardware DO loops, and fast auto-return interrupts

? Direct memory access (DMA) with six DMA channels supporting internal and external accesses; one-, two-

, and three-dimensional transfers (including circular buffering); end-of-block-transfer interrupts; and

triggering from interrupt lines and all peripherals

? Phase-lock loop (PLL) allows change of low-power divide factor (DF) without loss of lock and output clock

with skew elimination

? Hardware debugging support including on-chip emulation (OnCE) module, Joint Test Action Group (JTAG)

test access port (TAP)

Enhanced Filter

Coprocessor (EFCOP)

? Internal 24 × 24-bit filtering and echo-cancellation coprocessor that runs in parallel to the DSP core

? Operation at the same frequency as the core (up to 275 MHz)

? Support for a variety of filter modes, some of which are optimized for cellular base station applications:

? Real finite impulse response (FIR) with real taps

? Complex FIR with complex taps

? Complex FIR generating pure real or pure imaginary outputs alternately

? A 4-bit decimation factor in FIR filters, thus providing a decimation ratio up to 16

? Direct form 1 (DFI) Infinite Impulse Response (IIR) filter

? Direct form 2 (DFII) IIR filter

? Four scaling factors (1, 4, 8, 16) for IIR output

? Adaptive FIR filter with true least mean square (LMS) coefficient updates

? Adaptive FIR filter with delayed LMS coefficient updates

Internal Peripherals

Enhanced 8-bit parallel host interface (HI08) supports a variety of buses (for example, ISA) and provides

glueless connection to a number of industry-standard microcomputers, microprocessors, and DSPs

Two enhanced synchronous serial interfaces (ESSI), each with one receiver and three transmitters (allows

six-channel home theater)

Serial communications interface (SCI) with baud rate generator

Triple timer module

Up to 34 programmable general-purpose input/output (GPIO) pins, depending on which peripherals are

enabled

Applications

DSP56321 applications require high performance, low power, small packaging, and a large amount of internal

memory. The EFCOP can accelerate general filtering applications. Examples include:

? Wireless and wireline infrastructure applications

? Multi-channel wireless local loop systems

? Security encryption systems

? Home entertainment systems

? DSP resource boards

? High-speed modem banks

? IP telephony