EN25P05-100GC中文資料宜揚科技數據手冊PDF規格書

GENERAL DESCRIPTION

The EN25P05 is a 512 K-bit (64K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.

The EN25P05 is designed to allow either single Sector at a time or full chip erase operation. The EN25P05 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector.

FEATURES

? Single power supply operation

- Full voltage range: 2.7-3.6 volt

? 512 Kbit Serial Flash

- 512 K-bit/64 K-byte/256 pages

- 256 bytes per programmable page

? High performance

- 75MHz clock rate

? Low power consumption

- 5 mA typical active current

- 1 μA typical power down current

? Uniform Sector Architecture:

- Two 32-Kbyte sectors

? Software and Hardware Write Protection:

- Write Protect all or portion of memory via software

- Enable/Disable protection with WP# pin

? High performance program/erase speed

- Byte program time: 8μs typical

- Page program time: 1.5ms typical

- Sector erase time: 500ms typical

- Chip erase time: 1 Seconds typical

? Minimum 100K endurance cycle

? Package Options

- 8 pins SOP 150mil body width

- 8 contact VDFN

- All Pb-free packages are RoHS compliant

? Commercial and industrial temperature Range