ESP32-C5-WROOM-1-N8R4中文資料樂鑫科技數據手冊PDF規格書

1.1 Features

CPU and On-Chip Memory

? ESP32-C5 embedded, 32-bit RISC-V

single-core microprocessor, up to 240 MHz

? ROM: 320 KB

? HP SRAM: 384 KB

? LP SRAM: 16 KB

Wi-Fi

? 1T1R in 2.4 and 5 GHz dual band

? Operating frequency: 2412 ~ 2484 MHz, 5180 ~

5885 MHz

? IEEE 802.11ax-compliant

– 20 MHz-only non-AP mode

– Uplink and downlink OFDMA to enhance

connectivity and performance in

congested environments for IoT

applications

– Downlink MU-MIMO (multi-user, multiple

input, multiple output) to increase network

capacity

– Beamformee that improves signal quality

– Spatial reuse to maximize parallel

transmissions

– Target wake time (TWT) that optimizes

power saving mechanisms

? IEEE 802.11ac-compliant

– 20 MHz bandwidth

– Downlink fullband MU-MIMO

? Fully compatible with IEEE 802.11b/g/n protocol

– 20 MHz and 40 MHz bandwidth

– Data rate up to 150 Mbps

– Wi-Fi Multimedia (WMM)

– TX/RX A-MPDU, TX/RX A-MSDU

– Immediate Block ACK

– Fragmentation and defragmentation

– Transmit opportunity (TXOP)

– Automatic Beacon monitoring (hardware

TSF)

– Four virtual Wi-Fi interfaces

– Simultaneous support for Infrastructure

BSS in Station mode, SoftAP mode, Station

+ SoftAP mode, and promiscuous mode

Note that when ESP32-C5 scans in Station

mode, the SoftAP channel will change

along with the Station channel

– Antenna diversity

– 802.11mc FTM

Bluetooth?

? Bluetooth LE: Bluetooth Core 6.0 certified

? Bluetooth mesh 1.1

? High power mode (20 dBm)

? Direction finding (AoA/AoD)

? Periodic advertising with responses (PAwR)

? LE connection subrating

? LE power control

? Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps

? LE advertising extensions and multiple

advertising sets

? Allow devices to operate in Broadcaster,

Observer, Central, and Peripheral roles

concurrently

IEEE 802.15.4

? Compliant with IEEE 802.15.4-2015 protocol

? OQPSK PHY in 2.4 GHz band

? Data rate: 250 Kbps

? Thread 1.4

? Zigbee 3.0

Peripherals

? GPIO, SPI, parallel IO interface, UART, I2C, I2S,

RMT (TX/RX), pulse counter, LED PWM, USB

Serial/JTAG controller, MCPWM, GDMA, CAN FD

controller, SDIO slave controller, BitScrambler,

event task matrix, ADC, temperature sensor,

brownout detector, analog voltage comparator,

system timer, general-purpose timers, RTC

timer, watchdog timers, etc.

Integrated Components on Module

? 48 MHz crystal oscillator

? SPI flash

Antenna Options

? ESP32-C5-WROOM-1: On-board PCB antenna

? ESP32-C5-WROOM-1U: External antenna via a

connector or module pins

Operating Conditions

? Operating voltage/Power supply: 3.0 ~ 3.6 V

? Operating ambient temperature: –40 ~ 85 °C