HCPL-7840-560E中文資料安華高數(shù)據(jù)手冊PDF規(guī)格書

Description

The HCPL-7840 isolation amplifer family was designed for current sensing in electronic motor drives. In a typical implementation, motor currents ?ow through an external resistor and the resulting analog voltage drop is sensed by the HCPL-7840. A di?erential output voltage is created on the other side of the HCPL-7840 optical isolation barrier. This di?erential output voltage is proportional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit. Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the HCPL-7840 was designed to ignore very high common mode transient slew rates (of at least 10 kV/μs).

The high CMR capability of the HCPL-7840 isolation amplifer provides the precision and stability needed to accurately monitor motor current in high noise motor control environ-ments, providing for smoother control (less “torque ripple”) in various types of motor control applications.

Features

● 15 kV/μs common-mode rejection at VCM = 1000 V

● Compact, auto-insertable standard 8-pin DIP package

● 0.00025 V/V/°C gain drift vs. temperature

● 0.3 mV input o?set voltage

● 100 kHz bandwidth

● 0.004 nonlinearity

● Worldwide safety approval:

UL 1577 (3750 Vrms/1 min.)

and CSA, IEC/EN/DIN EN 60747-5-2

● Advanced Sigma-Delta (∑-Δ) A/D converter technology

● Fully di?erential circuit topology

● 0.8 μm CMOS IC technology

Applications

● Motor phase and rail current sensing

● Inverter current sensing

● Switched mode power supply signal isolation

● General purpose current sensing and monitoring

● General purpose analog signal isolation