JM1AN-ZTM-DC9V-F繼電器的功率繼電器高于2A規(guī)格書PDF中文資料

FEATURES

? Compact, high-capacity, and

resistant to inductive loads

It can control an inductive load with

inrush current of 80 A and steady

state current of 20 A.

? Excellent contact welding resistance

High contact pressure, a forced opening

mechanism, and a forced wiping

mechanism realizes an excellent contact

welding resistance.

? High breakdown voltage and surge

resistant relay

More than 6.4 mm .252 inch maintained

for the insulation distance between

contacts and coil, and the breakdown

voltage between contacts and coil is

5,000 V for 1 minute. In addition, the

surge resistance between contacts and

coil is greater than 10,000 V.

? Resistant to external force

An absorber mechanism is used on the

load terminals, giving a large

improvement in characteristics variations

caused by the external force during

FASTON placement/removal.

? Flux resistance mechanism

The terminal area is plugged with resin to

prevent flux seepage during PCB

mounting. (TMP type)

? Conforms to the various safety

standards

UL, CSA, VDE available

? The line up can support economical

mounting methods.

The relay are equipped with a drive

terminal (coil terminal) on one side for

PCBs, and a load terminal (tab terminal

#250) on the reverse side. The line up

includes the TM type which can be

attached directly to the PCB composing a

drive circuit, and the TMP type which

supports economical wiring. The TMP

type can also be directly attached, and a

high capacity load can be wired to the tab

terminal.

TYPICAL APPLICATIONS

? Compressor and heater control in

air conditioners

? Power control in hot air type heaters

? Magnetron control in microwave

ovens

? Lamp and motor control in

OA equipment such as copiers and

facsimiles.