L9613集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

L9613屬于集成電路（IC）的驅動器接收器收發器。由意法半導體集團制造生產的L9613驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Description

The L9613 is a monolithic integrated circuit containing standard ISO 9141 compatible interface functions.

Features

■ Operating power supply voltage range 4.8V ≤ VS ≤ 36V (40V for transients)

■ Reverse supply (battery) protected down to VS ≥ -24V

■ Standby mode with very low current consumption ISSB ≤ 1mA @ VCC ≤ 0.5V

■ Min. possible Baud rate according to ISO9141 ≥ 130 kBaud

■ Low quiescent current in off condition ISOFF = 120μA

■ TTL compatible TX input

■ Bidirectional K-I/O pin with supply voltage dependent input threshold

■ Over temperature shut down function selective to K-I/O pin

■ Wide input and output voltage range: -24V ≤ VK ≤ VS

■ K output current limitation, typ. IK = 60mA

■ Defined OFF output status in under voltage condition and VS or GND interruption

■ Controlled output slope for low EMI

■ High input impedance for open VS or GND connection

■ Defined output ON status of LO or RX for open LI or K inputs

■ Defined K output OFF for TX input open

■ Integrated pull up resistors for TX, RX and LO

■ EMI robustness optimized