L9942XP1集成電路（IC）的電機驅動器控制器規格書PDF中文資料

L9942XP1屬于集成電路（IC）的電機驅動器控制器。由意法半導體集團制造生產的L9942XP1電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。

Description

The L9942 is an integrated stepper motor driver for bipolar stepper motors with microstepping and programmable current profile look-up-table to allow a flexible adaptation of the stepper motor characteristics and intended operating conditions.

It is possible to use different current profiles depending on target criteria: audible noise, vibrations, rotation speed or torque.

Features

■ Two full bridges for max. 1.3 A load (RDSON= 500 m)

■ Programmable current waveform with look-up table: 9 entries with 5 bit resolution

■ Current regulation by integrated PWM controller and internal current sensing

■ Programmable stepping mode: full, half, mini and microstepping

■ Programmable slew rate for EMC and power dissipation optimization

■ Programmable Fast-, Slow-, Mixed- and Auto Decay Mode

■ Full-scale current programmable with 3 bit resolution

■ Programmable stall detection

■ Step clock input for reduced μController requirements

■ Very low current consumption in standby mode IS< 3 μA, typ. Tj ?85 °C

■ All outputs short circuit protected with openload, overload current, temperature warning and thermal shutdown

■ The PWM signal of the internal PWM controller is available as digital output.

■ All parameters are guaranteed for 3 V < Vcc < 5.3 Vand for 7 V < Vs < 20 V

Applications