L99MOD50XP

Multi-output driver for automotive applications

Features ?AEC-Q100qualified ?Twohalfbridgesfor6Aload (RDSon=150m?? ?Twohalfbridgesfor3Aload(RDSon=300m?) ?Twohalfbridgesfor0.75Aload (RDSon=1600m?) ?Onehigh-sidedriverfor6Aload(RDSon= 90m?) ?Twoconfigurablehigh-sidedriversforupto 1.5Aloa

L99MOD50XP

多輸出驅(qū)動(dòng)器; ? AEC-Q100 qualified \n? Two half bridges for 6 A load (RDSon = 150 mΩ) \n? Two half bridges for 3 A load (RDSon = 300 mΩ) \n? Two half bridges for 0.75 A load (RDSon = 1600 mΩ) \n? One high-side driver for 6 A load (RDSon = 90 mΩ) \n? Two configurable high-side drivers for up to 1.5A load (RDSon = 500 mΩ) or 0.4 A load (RDSon = 1800 mΩ) \n? Two high-side drivers for 0.5 A load (RDSon = 1600 mΩ) \n? Programmable soft start function to drive loads with higher inrush currents as current limitation value? Very low current consumption in standby mode (IS j ≤ 85 °C; ICCj ≤ 85 °C) \n? Current monitor output for all high-side drivers \n? Device contains temperature warning and protection \n? Open-load detection for all outputs \n? Over-current protection for all outputs \n? PWM control of all outputs \n? Charge pump output for reverse polarity protection \n? ST standard serial peripheral interface (ST-SPI 3.0);

The L99MOD50XP is a microcontroller-driven multifunctional actuator driver for automotive applications. \n\n Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five high-side drivers. \n\n The integrated SPI controls all operating modes (forward, reverse, brake and high impedance).\n\n Also all diagnostic information is available via SPI read.\n\n

L99MOD50XPTR

Package：36-??FSOP（0.295"，7.50mm 寬）；包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 類別：集成電路（IC） 專用 IC 描述：MULTI-OUTPUT DRIVER