L99MOD53XP

Multi-output driver for automotive applications

Features ?AEC-Q100qualified ?Threehalfbridgesfor0.75Aloads (RDSon=1600mΩ? ?Twoconfigurablehigh-sidedriversforupto 1.5Aload(RDSon=500mΩ??or?0.35Aload (RDSon=1800mΩ) ?Onefullbridgefor6Aload(RDSon=150mΩ) ?Onehigh-sidedriverfor6Aload (RDSon=100mΩ) ?

L99MOD53XP

多輸出驅(qū)動器; ? AEC-Q100 qualified \n? Three half bridges for 0.75 A loads (RDSon=1600 mΩ) \n? Two configurable high-side drivers for up to 1.5 A load (RDSon=500 mΩ) or 0.35 A load (RDSon=1800 mΩ) \n? One full bridge for 6 A load (RDSon =150 mΩ) \n? One high-side driver for 6 A load (RDSon =100 mΩ) \n? Programmable soft start function to drive loads with higher inrush currents (i.e. current > 6 A, > 1.5 A) \n? Very low current consumption in standby mode (ISj ≤ 85 °C)? All outputs short circuit protected \n? Current monitor output for high-side OUT1, OUT4, OUT5 and OUT8 \n? All outputs over temperature protected \n? Open-load diagnostic for all outputs \n? Overload diagnostic for all outputs \n? PWM control of all outputs \n? Charge pump output for reverse polarity protection;

The L99MOD53XP is a microcontroller-driven multifunctional actuator driver for automotive applications. \n\n Up to three DC motors and three grounded resistive loads can be driven with five half bridges and three high-side drivers. \n\n The integrated SPI controls all operating modes (forward, reverse, brake and high impedance). Also all diagnostic information is available via SPI read.\n\n

L99MOD53XPTR

Package：36-PowerBFSOP（0.295"，7.50mm 寬）；包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 類別：集成電路（IC） 專用 IC 描述：MULTI-OUTPUT DRIVER