MC100EP16VADT集成電路（IC）的專用邏輯器件規格書PDF中文資料

MC100EP16VADT屬于集成電路（IC）的專用邏輯器件。由安森美半導體公司制造生產的MC100EP16VADT專用邏輯器件專用邏輯 IC 設計提供應用特定的邏輯輸出類型，例如 BCD 速率倍增、可尋址掃描端口、總線終端陣列、CML 驅動器、比較器、ABT 掃描測試、二進制全加法器、互補對加逆變器、可配置緩沖器、觸點顫動消除器、晶體振蕩器、延遲元件、差分接收器、LVTTL 到 GTLP 收發器、存儲器解碼器、電源良好檢測器和分頻器。

Description

The EP16VA is a world?class differential receiver/driver. The device is functionally equivalent to the EP16 and LVEP16 devices but with high gain output. QHG and QHG outputs have a DC gain several times larger than the DC gain of an EP16.

The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Under open input conditions (pulled to VEE) internal input clamps will force the QHG output LOW.

Special considerations are required for differential inputs under No Signal conditions to prevent instability. The 100 Series contains temperature compensation.

Features

? 270 ps Typical Propagation Delay

? Gain > 20

? 20 mV Minimum Input Voltage Swing

? Maximum Frequency > 3 GHz Typical

? PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V

? NECL Mode Operating Range: VCC = 0 V with VEE = ?3.0 V to ?5.5 V

? Open Input Default State

? VBB Output

? Pb?Free Packages are Available