MC33293AT中文資料摩托羅拉數(shù)據(jù)手冊PDF規(guī)格書

Quad Low Side Switch

The MC33293A is a single monolithic integrated circuit designed for quad low side switching applications. This device was initially conceived as a quad injector driver for use in the harsh automotive environment but is well suited for many other applications. The MC33293A incorporates SMARTMOS? technology having CMOS logic, bipolar and CMOS analog circuitry and DMOS power MOSFETs. All of the device inputs are CMOS compatible. The four output devices are N-channel power MOSFETs. A Fault detect output is provided to flag the existence of open loads (outputs ON or OFF) or shorted loads. If a short circuit is detected, the fault detect circuitry turns off the shorted output, but allows the others to function normally. An overvoltage (VPWR) condition will turn off all outputs for the overvoltage duration. Each output functions independently and has a drain-to-gate diode clamp for inductive flyback voltage protection. A Single/Dual select pin is incorporated to allow either individual output control or control of a pair of outputs from one input.

The MC33293A is parametrically specified over – 40°C ≤ TA ≤ 125°C ambient temperature and a 9.0 V ≤ VPWR ≤ 14.5 V supply.

? Designed to Operate with Supply Voltages of 5.5 V to 30 V

? CMOS Compatible Inputs with Active Pull-Downs

? Maximum 5.0 mA Quiescent Current

? RDS(on) of 0.25 ? Maximum at 25°C, with VPWR ≥ 9.0 V

? Each Output Clamped to 65 V for Driving Inductive Loads

? Each Output Current Limited at 3.0 A to handle Incandescent Lamp Loads

? Active Low Output Fault Status with Interrogation Capability

? Open Load Detection (Output ON or OFF)

? Capable of Withstanding Reverse Battery

? Overvoltage Shutdown

? Short Circuit Detection and Shutdown with Automatic Retry