MCP14A0052T-E/MAY集成電路（IC）的柵極驅動器規格書PDF中文資料

MCP14A0052T-E/MAY屬于集成電路（IC）的柵極驅動器。由微芯科技股份有限公司制造生產的MCP14A0052T-E/MAY柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。

General Description

The MCP14A0051/2 devices are high-speed MOSFET

drivers that are capable of providing up to 0.5A of peak

current while operating from a single 4.5V to 18V

supply. The inverting (MCP14A0051) or noninverting

(MCP14A0052) single-channel output is directly

controlled from either TTL or CMOS (2V to 18V) logic.

These devices also feature low shoot-through current,

matched rise and fall times and short propagation

delays, which make them ideal for high switching

frequency applications.

The MCP14A0051/2 family of devices offers enhanced

control with enable functionality. The active-high

Enable (EN) pin can be driven low to drive the output of

the MCP14A0051/2 low, regardless of the status of the

Input (IN) pin. An integrated pull-up resistor allows the

user to leave the Enable pin floating for standard

operation.

Additionally, the MCP14A0051/2 devices feature separate

ground pins (AGND and GND), allowing greater

noise isolation between the level-sensitive Input/

Enable pins and the fast, high-current transitions of the

push-pull output stage.

These devices are highly latch-up resistant under any

condition within their power and voltage ratings. They

can accept up to 500 mA of reverse current being

forced back into their outputs without damage or logic

upset. All terminals are fully protected against

Electrostatic Discharge (ESD) up to 1.75 kV (HBM) and 100V (MM).

Features

? High Peak Output Current: 0.5A (typical)

? Wide Input Supply Voltage Operating Range:

- 4.5V to 18V

? Low Shoot-Through/Cross-Conduction Current in

Output Stage

? High Capacitive Load Drive Capability:

- 1000 pF in 40 ns (typical)

? Short Delay Times: 33 ns (tD1), 24 ns (tD2) (typical)

? Low Supply Current: 375 μA (typical)

? Low Voltage Threshold Input and Enable with

Hysteresis

? Latch-up Protected: Withstands 500 mA Reverse

Current

? Space-Saving Packages:

- 6-Lead SOT-23

- 6-Lead 2x2 DFN

Applications

? Switch Mode Power Supplies (SMPS)

? Pulse Transformer Drive

? Line Drivers

? Level Translator

? Motor and Solenoid Drive