MCP3002ISLASHST中文資料微芯科技數據手冊PDF規(guī)格書

The MCP3002 is a successive approximation 10-bit

analog-to-digital (A/D) converter with on-board sample

and hold circuitry.

The MCP3002 is programmable to provide a single

pseudo-differential input pair or dual single-ended

inputs. Differential Nonlinearity (DNL) and Integral

Nonlinearity (INL) are both specified at ±1 LSB. Communication

with the device is done using a simple serial

interface compatible with the SPI protocol. The device

is capable of conversion rates of up to 200 ksps at 5V

and 75 ksps at 2.7V.

The MCP3002 operates over a broad voltage range,

2.7V to 5.5V. Low-current design permits operation with

a typical standby current of 5 nA and a typical active

current of 375 μA.

The MCP3002 is offered in 8-pin MSOP, PDIP, TSSOP

and 150 mil SOIC packages.

? 10-bit resolution

? ±1 LSB maximum DNL

? ±1 LSB maximum INL

? Analog inputs programmable as single-ended or

pseudo-differential pairs

? On-chip sample and hold

? SPI serial interface (modes 0,0 and 1,1)

? Single supply operation: 2.7V - 5.5V

? 200 ksps max sampling rate at VDD = 5V

? 75 ksps max sampling rate at VDD = 2.7V

? Low power CMOS technology:

- 5 nA typical standby current, 2 μA maximum

- 550 μA maximum active current at 5V

? Industrial temperature range: -40°C to +85°C

? 8-pin MSOP, PDIP, SOIC and TSSOP packages

Applications

? Sensor Interface

? Process Control

? Data Acquisition

? Battery Operated Systems