MCP3550-60T-E/SN中文資料微芯科技數(shù)據(jù)手冊PDF規(guī)格書

Description

The Microchip Technology Inc. MCP3550/1/3 devices are 2.7V to 5.5V low-power, 22-bit Delta-Sigma Analog-to-Digital Converters (ADCs). The devices offer output noise as low as 2.5 μVRMS, with a total unadjusted error of 10 ppm. The family exhibits 6 ppm Integral Non-Linearity (INL) error, 3 μV offset error and less than 2 ppm full-scale error. The MCP3550/1/3 devices provide high accuracy and low noise performance for applications where sensor measurements (such as pressure, temperature and humidity) are performed. With the internal oscillator and high oversampling rate, minimal external components are required for high-accuracy applications.

Features

? 22-bit ADC in Small 8-pin MSOP Package with Automatic Internal Offset and Gain Calibration

? Low-Output Noise of 2.5 μVRMS with Effective Resolution of 21.9 bits (MCP3550/1)

? 3 μV Typical Offset Error

? 2 ppm Typical Full-Scale Error

? 6 ppm Maximum INL Error

? Total Unadjusted Error Less Than 10 ppm

? No Digital Filter Settling Time, Single-Command Conversions through 3-wire SPI Interface

? Ultra-Low Conversion Current (MCP3550/1):

-100μA typical (VDD= 2.7V)

-120μA typical (VDD= 5.0V)

? Differential Input with VSSto VDDCommon Mode Range

? 2.7V to 5.5V Single-Supply Operation

? Extended Temperature Range: - -40°C to +125°C

Applications

? Weigh Scales

? Direct Temperature Measurement

? 6-digit DVMs

? Instrumentation

? Data Acquisition

? Strain Gauge Measurement