NXS0108BQ-Q100集成電路（IC）的轉(zhuǎn)換器電平移位器規(guī)格書PDF中文資料

1. General description

The NXS0108-Q100 is an 8-bit, dual supply translating transceiver with auto direction sensing, that

enables bidirectional voltage level translation. It features two 8-bit input-output ports (An and Bn),

one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at

any voltage between 1.2 V and 3.6 V and VCC(B) can be supplied at any voltage between 1.65 V

and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.2 V,

1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced

to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry

disables the output, preventing the damaging backflow current through the device when it is

powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

? Automotive product qualification in accordance with AEC-Q100 (Grade 1)

? Specified from -40 °C to +85 °C and from -40 °C to +125 °C

? Wide supply voltage range:

? VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V

? Maximum data rates:

? Push-pull: 110 Mbps

? IOFF circuitry provides partial Power-down mode operation

? Inputs accept voltages up to 5.5 V

? ESD protection:

? HBM JESD22-A114E Class 2 exceeds 2.5 kV for A port

? HBM JESD22-A114E Class 3B exceeds 15 kV for B port

? CDM JESD22-C101E exceeds 1.5 kV

? IEC61000-4-2 contact discharge exceeds 8 kV for B port

? Latch-up performance exceeds 100 mA per JESD 78B Class II

? DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of

solder joints