PDRV3233EPHPRQ1中文資料德州儀器數據手冊PDF規格書

1 Features

? AEC-Q100 qualified for automotive applications -

Temperature options:

– DRV3233EPHP: –40°C to +150°C, TA

– DRV3233QPHP (Preview): –40°C to +125°C,TA

? Functional Safety-Compliant targeted

– Developed for functional safety applications

– Documentation to aid ISO 26262 system design

will be available

– Systematic capability up to ASIL D targeted

? Three phase half-bridge gate driver

– Drives six N-channel MOSFETs (NMOS)

– 4.5 to 60-V wide operating voltage range

– Bootstrap architecture for high-side gate driver

– Charge pump for 50mA average gate current

– 100% PWM duty cycle support

– Overdrive supply of external switches

? Smart Gate Drive architecture

– 45-level configurable peak gate drive current up

to 1000 / 2000-mA (source / sink)

– Three-step dynamic drive current control

– Soft shutdown for power stage protection

? Low-side Current Sense Amplifier

– Sub-1 mV low input offset across temperature

– 9-level adjustable gain

? SPI-based detailed configuration and diagnostics

? DRVOFF pin to disable driver independently

? High voltage wake up pin (nSLEEP)

? Multiple PWM interface options available

– 6x, 3x, 1x PWM Modes

– PWM over SPI

? Supports 3.3-V, and 5-V Logic Inputs

? Optional programmable OTP for reset settings

? Advanced and configurable protection features

– Battery and power supply voltage monitors

– Phase feedback comparator

– MOSFET VDS and Rsense over current monitors

– Analog Built-In-Self-Test, Clock monitors

– Fault condition indicator pin

2 Applications

? 12-V / 24-V Automotive Motor-Control Applications

– Electrical Power Steering and Steer-by-Wire

– Electrical Mechanical Brake, Brake Boost

Assist and Brake-by-Wire

– Transmission and Shift-by-Wire

– Automotive Pumps

3 Description

The DRV3233 is an integrated smart gate driver

for 12-V and 24-V automotive three-phase BLDC

applications. The device provides three half-bridge

gate drivers, each capable of driving high-side and

low-side N-channel power MOSFETs. The DRV3233

generates the correct gate drive voltages using an

integrated bootstrap diode and a GVDD charge

pump. The Smart Gate Drive architecture supports

configurable peak gate drive current from 0.8-mA

up to 1-A source and 2-A sink. The DRV3233 can

operate from a single power supply with a wide input

range of 4.5 to 60-V. A trickle charge pump enables

100% PWM duty cycle control, and provides overdrive

supply voltage for external switches.

The DRV3233 provides low-side current sense

amplifiers to support resistor based low-side current

sensing. The low offset of the amplifiers enables the

system to obtain precise motor current measurement.

A wide range of diagnostics and protection features

integrated in the DRV3233 enable a robust motor

drive system design and help eliminate the needs

of external components. The highly configurable

device response allows the device to be integrated

seamlessly into a variety of system designs.