PIC10F222-IP中文資料微芯科技數據手冊PDF規格書

GENERAL DESCRIPTION

The PIC10F220/222 devices from Microchip Technology are low-cost, high-performance, 8-bit, fully static Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions are singlecycle (1 μs) except for program branches, which take two cycles. The PIC10F220/222 devices deliver performance in an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy-to-use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:

? Only 33 Single-Word Instructions to Learn

? All Single-Cycle Instructions Except for Program Branches which are Two-Cycle

? 12-bit Wide Instructions

? 2-Level Deep Hardware Stack

? Direct, Indirect and Relative Addressing modes for Data and Instructions

? 8-bit Wide Data Path

? 8 Special Function Hardware Registers

? Operating Speed:

- 500 ns instruction cycle with 8 MHz internal clock

- 1 μs instruction cycle with 4 MHz internal clock

Special Microcontroller Features:

? 4 or 8 MHz Precision Internal Oscillator:

- Factory calibrated to ±1

? In-Circuit Serial Programming? (ICSP?)

? In-Circuit Debugging (ICD) Support

? Power-On Reset (POR)

? Short Device Reset Timer, DRT (1.125 ms typical)

? Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation

? Programmable Code Protection

? Multiplexed MCLR Input Pin

? Internal Weak Pull-Ups on I/O Pins

? Power-Saving Sleep mode

? Wake-up from Sleep on Pin Change

Low-Power Features/CMOS Technology:

? Operating Current:

- < 175 μA @ 2V, 4 MHz

? Standby Current:

- 100 nA @ 2V, typical

? Low-Power, High-Speed Flash Technology:

- 100,000 Flash endurance

- > 40-year retention

? Fully Static Design

? Wide Operating Voltage Range: 2.0V to 5.5V

? Wide Temperature Range:

- Industrial: -40°C to +85°C

- Extended: -40°C to +125°C

Peripheral Features:

? 4 I/O Pins:

- 3 I/O pins with individual direction control

- 1 input only pin

- High current sink/source for direct LED drive

- Wake-on-change

- Weak pull-ups

? 8-bit Real-Time Clock/Counter (TMR0) with 8-bit Programmable Prescaler

? Analog-to-Digital (A/D) Converter:

- 8-bit resolution

- 2 external input channels

- 1 internal input channel dedicated