PIC18F66J55中文資料微芯科技數(shù)據(jù)手冊(cè)PDF規(guī)格書

DEVICE OVERVIEW

This document contains device-specific information for the following devices:

? PIC18F65J50 ? PIC18F85J50

? PIC18F66J50 ? PIC18F86J50

? PIC18F66J55 ? PIC18F86J55

? PIC18F67J50 ? PIC18F87J50

This family introduces a new line of low-voltage USB microcontrollers with the main traditional advantage of all PIC18 microcontrollers – namely, high computational performance and a rich feature set – at an extremely competitive price point. These features make the PIC18F87J50 family a logical choice for many high-performance applications, where cost is a primary consideration.

Universal Serial Bus Features:

? USB V2.0 Compliant SIE

? Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s)

? Supports Control, Interrupt, Isochronous and Bulk Transfers

? Supports up to 32 Endpoints (16 bidirectional)

? 3.9-Kbyte Dual Access RAM for USB

? On-Chip USB Transceiver

Flexible Oscillator Structure:

? High-Precision PLL for USB

? Two External Clock modes, up to 48 MHz

? Internal 31 kHz Oscillator, Tunable Internal Oscillator, 31 kHz to 8 MHz

? Secondary Oscillator using Timer1 @ 32 kHz

? Fail-Safe Clock Monitor:

- Allows for safe shutdown if any clock stops

Peripheral Highlights:

? High-Current Sink/Source 25 mA/25mA (PORTB and PORTC)

? Four Programmable External Interrupts

? Four Input Change Interrupts

? Two Capture/Compare/PWM (CCP) modules

? Three Enhanced Capture/Compare/PWM (ECCP) modules:

- One, two or four PWM outputs

- Selectable polarity

- Programmable dead time

- Auto-shutdown and auto-restart

? Two Master Synchronous Serial Port (MSSP) modules supporting 3-Wire SPI (all 4 modes) and I2C? Master and Slave modes

? 8-Bit Parallel Master Port/Enhanced Parallel Slave Port with 16 Address Lines

? Dual Analog Comparators with Input Multiplexing

? 10-Bit, up to 12-Channel Analog-to-Digital (A/D) Converter module:

- Auto-acquisition capability

- Conversion available during Sleep

? Two Enhanced USART modules:

- Supports RS-485, RS-232 and LIN 1.2

- Auto-wake-up on Start bit

- Auto-Baud Detect

External Memory Bus

(80-pin devices only):

? Address Capability of up to 2 Mbytes

? 8-Bit or 16-Bit Interface

? 12-Bit, 16-Bit and 20-Bit Addressing modes

Special Microcontroller Features:

? 5.5V Tolerant Inputs (digital-only pins)

? Low-Power, High-Speed CMOS Flash Technology

? C Compiler Optimized Architecture for Re-Entrant Code

? Power Management Features:

- Run: CPU on, peripherals on

- Idle: CPU off, peripherals on

- Sleep: CPU off, peripherals off

? Priority Levels for Interrupts

? Self-Programmable under Software Control

? 8 x 8 Single-Cycle Hardware Multiplier

? Extended Watchdog Timer (WDT):

- Programmable period from 4 ms to 131s

? Single-Supply In-Circuit Serial Programming? (ICSP?) via Two Pins

? In-Circuit Debug (ICD) with 3 Breakpoints via Two Pins

? Operating Voltage Range of 2.0V to 3.6V

? On-Chip 2.5V Regulator

? Flash Program Memory of 10000 Erase/Write Cycles and 20-Year Data Retention