PM2210中文資料施耐德數(shù)據(jù)手冊(cè)PDF規(guī)格書

Features

The PM2200 series meter supports many features, a few of the features are listed

below:

? Self guided LCD display and navigation

? Energy accounting and balancing

? Measurement of both True PF and Displacement PF

? Active, reactive, and apparent energy readings

? Min/Max values of instantaneous parameters with timestamp.

? Cybersecurity: The meter supports the disabling of RS-485 port through front

panel keys to prevent unauthorized access. Toggle the RTU devices in case

of limited availability of nodes in software system.

? SnapShot: The meter features include snapshot, which captures values of

average voltage, average current, total active power, and delivered energy

based on configured time in HH.MM format.

? Suppression current: This is the minimum current at which the meter starts

functioning. The meter can be configured to disregard the measurement of

induced / auxiliary load current in the circuit. The suppression current

selection can be done through the front display and through communication.

The suppression current range is from 5 mA to 99 mA. The meter shows

measurement if applied value is above the suppression value. The default

suppression current is 5 mA.

You can use the meter as a stand-alone device, but its extensive capabilities are

fully realized when used as part of an energy management system.

For applications, feature details and the most current and complete specifications

of the PM2200 meters, see the EasyLogic PM2000 series technical datasheet at

www.se.com.