ST16C550CJ44集成電路（IC）的UART（通用異步接收器發(fā)送器）規(guī)格書PDF中文資料

GENERAL DESCRIPTION

The ST16C550 (550) is a universal asynchronous receiver

and transmitter with 16 byte transmit and receive

FIFO. It operates at 2.97 to 5.5 volts. A programmable

baud rate generator can select transmit and receive

clock rates from 50 bps to 1.5 Mbps.

The ST16C550 is an improved version of the NS16C550

UART with higher operating speed and lower access

time. The ST16C550 on board status registers provides

the error conditions, type and status of the transfer

operation being performed. Included is complete MODEM

control capability, and a processor interrupt

system that may be software tailored to the user’s

requirements. The ST16C550 provides internal loopback

capability for on board diagnostic testing.

The ST16C550 is available in 40 pin PDIP, 44 pin PLCC,

and 48 pin TQFP packages. It is fabricated in an

advanced CMOS process to achieve low drain power

and high speed requirements.

FEATURES

· Pin to pin and functionally compatible to the Industry

Standard 16C550

· 2.97 to 5.5 volt operation

· 24MHz clock operation at 5V

· 16MHz clock operation at 3.3V

· 16 byte transmit FIFO

· 16 byte receive FIFO with error flags

· Full duplex operation

· Transmit and receive control

· Four selectable receive FIFO interrupt trigger levels

· Standard modem interface

· Compatible with ST16C450

· Low operating current ( 1.2mA typ.)