STM32F070CB中文資料意法半導(dǎo)體數(shù)據(jù)手冊PDF規(guī)格書

描述 Description

The STM32F070CB/RB/C6/F6 microcontrollers incorporate the high-performance ARM? Cortex?-M0 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 128 Kbytes of Flash memory and up to 16 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (up to two I2Cs, up to two SPIs and up to four USARTs), one USB Full speed device, one 12-bit ADC, seven general-purpose 16-bit timers and an advancedcontrol PWM timer.

特性 Features

? Core: ARM? 32-bit Cortex?-M0 CPU,

frequency up to 48 MHz

? Memories

– 32 to 128 Kbytes of Flash memory

– 6 to 16 Kbytes of SRAM with HW parity

? CRC calculation unit

? Reset and power management

– Digital & I/Os supply: VDD = 2.4 V to 3.6 V

– Analog supply: VDDA = VDD to 3.6 V

– Power-on/Power down reset (POR/PDR)

– Low power modes: Sleep, Stop, Standby

? Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC with x6 PLL option

– Internal 40 kHz RC oscillator

? Up to 51 fast I/Os

– All mappable on external interrupt vectors

– Up to 51 I/Os with 5V tolerant capability

? 5-channel DMA controller

? One 12-bit, 1.0 μs ADC (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Separate analog supply: 2.4 V to 3.6 V

? Calendar RTC with alarm and periodic wakeup

from Stop/Standby

? 11 timers

– One 16-bit advanced-control timer for

six-channel PWM output

– Up to seven 16-bit timers, with up to four

IC/OC, OCN, usable for IR control

decoding

– Independent and system watchdog timers

– SysTick timer

? Communication interfaces

– Up to two I2C interfaces

– Fast Mode Plus (1 Mbit/s) support, with

20 mA current sink

– SMBus/PMBus support (on single I/F)

– Up to four USARTs supporting master

synchronous SPI and modem control; one

with auto baud rate detection

– Up to two SPIs (18 Mbit/s) with 4 to 16

programmable bit frames

– USB 2.0 full-speed interface with BCD and

LPM support

? Serial wire debug (SWD)

? All packages ECOPACK?2