STM32F072CB數據手冊ST中文資料規格書

描述 Description

The STM32F072x8/xB microcontrollers incorporate the high-performance ARM?Cortex?-M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 128 Kbytes of Flash memory and 16 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I2Cs, two SPI/I2S, one HDMI CEC and four USARTs), one USB Full-speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer and an advanced-control PWM timer.

The STM32F072x8/xB microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.

The STM32F072x8/xB microcontrollers include devices in seven different packages ranging from 48 pins to 100 pins with a die form also available upon request. Depending on the device chosen, different sets of peripherals are included.

These features make the STM32F072x8/xB microcontrollers suitable for a wide range of applications such as application control and user interfaces, hand-held equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms and HVACs.

特性 Features

? Core: ARM?32-bit Cortex?-M0 CPU, frequency up to 48 MHz
? Memories
?64 to 128 Kbytes of Flash memory
?16 Kbytes of SRAM with HW parity
? CRC calculation unit
? Reset and power management
?Digital and I/O supply: VDD= 2.0 V to 3.6 V
?Analog supply: VDDA= VDDto 3.6 V
?Selected I/Os: VDDIO2= 1.65 V to 3.6 V
?Power-on/Power down reset (POR/PDR)
?Programmable voltage detector (PVD)
?Low power modes: Sleep, Stop, Standby
?VBATsupply for RTC and backup registers
? Clock management
?4 to 32 MHz crystal oscillator
?32 kHz oscillator for RTC with calibration
?Internal 8 MHz RC with x6 PLL option
?Internal 40 kHz RC oscillator
?Internal 48 MHz oscillator with automatic trimming based on ext. synchronization
? Up to 87 fast I/Os
?All mappable on external interrupt vectors
?Up to 68 I/Os with 5V tolerant capability and 19 with independent supply VDDIO2
? Seven-channel DMA controller
? One 12-bit, 1.0 μs ADC (up to 16 channels)
?Conversion range: 0 to 3.6 V
?Separate analog supply: 2.4 V to 3.6 V
? One 12-bit D/A converter (with 2 channels)
? Two fast low-power analog comparators with programmable input and output
? Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors
? Calendar RTC with alarm and periodic wakeup from Stop/Standby
? 12 timers
?One 16-bit advanced-control timer for six-channel PWM output
?One 32-bit and seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding or DAC control
?Independent and system watchdog timers
?SysTick timer
? Communication interfaces
?Two I2C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, one supporting SMBus/PMBus and wakeup
?Four USARTs supporting master synchronous SPI and modem control, two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature
?Two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, and with I2S interface multiplexed
?CAN interface
?USB 2.0 full-speed interface, able to run from internal 48 MHz oscillator and with BCD and LPM support
? HDMI CEC wakeup on header reception
? Serial wire debug (SWD)
? 96-bit unique ID
? All packages ECOPACK?2