STM32F301X6中文資料意法半導體數(shù)據(jù)手冊PDF規(guī)格書

Description

The STM32F301x6/8 family is based on the high-performance ARM? Cortex?-M4 32-bit RISC core operating at a frequency of up to 72 MHz and embedding a floating point unit (FPU). The family incorporates high-speed embedded memories (up to 64 Kbytes of Flash memory, 16 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The devices offer a fast 12-bit ADC (5 Msps), three comparators, an operational amplifier, up to 18 capacitive sensing channels, one DAC channel, a low-power RTC, one generalpurpose 32-bit timer, one timer dedicated to motor control, and up to three general-purpose 16-bit timers, and one timer to drive the DAC. They also feature standard and advanced communication interfaces: three I2Cs, up to three USARTs, up to two SPIs with multiplexed full-duplex I2S, and an infrared transmitter.

The STM32F301x6/8 family operates in the –40 to +85°C and –40 to +105°C temperature ranges from at a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F301x6/8 family offers devices in 32-, 48-, 49- and 64-pin packages.

The set of included peripherals changes with the device chosen.

Features

? Core: ARM? 32-bit Cortex?-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction

? Memories

– 32 to 64 Kbytes of Flash memory

– 16 Kbytes of SRAM on data bus

? CRC calculation unit

? Reset and power management

– VDD, VDDA voltage range: 2.0 to 3.6 V

– Power-on/Power down reset (POR/PDR)

– Programmable voltage detector (PVD)

– Low-power: Sleep, Stop, and Standby

– VBAT supply for RTC and backup registers

? Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC with x 16 PLL option

– Internal 40 kHz oscillator

? Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant

? Interconnect matrix

? 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC

? 1 × ADC 0.20 μs (up to 15 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential mode, separate analog supply from 2.0 to 3.6 V

? Temperature sensor

? 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V

? Three fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V

? 1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V

? Up to 18 capacitive sensing channels supporting touchkey, linear and rotary sensors

? Up to 9 timers

– One 32-bit timer with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

– One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop

– Three 16-bit timers with IC/OC/OCN or PWM, deadtime gen. and emergency stop

– One 16-bit basic timer to drive the DAC

– 2 watchdog timers (independent, window)

– SysTick timer: 24-bit downcounter

? Calendar RTC with alarm, periodic wakeup from Stop/Standby

? Communication interfaces

– Three I2Cs with 20 mA current sink to support Fast mode plus

– Up to 3 USARTs, 1 with ISO 7816 I/F, auto baudrate detect and Dual clock domain

– Up to two SPIs with multiplexed full duplex I2S

– Infrared transmitter

? Serial wire debug (SWD), JTAG

? 96-bit unique ID