STM32F401VE

帶DSP和FPU的高性能基本型系列ARM Cortex-M4 MCU，具有512 KB Flash、84 MHz CPU和ART加速器; ? Core: ARM?32-bit Cortex?-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait state execution from Flash memory, frequency up to 84 MHz, memory protection unit, 105 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions \n? Memories \n ?up to 512 Kbytes of Flash memory \n ?up to 96 Kbytes of SRAM \n? Clock, reset and supply management \n ?1.7 V to 3.6 V application supply and I/Os \n ?POR, PDR, PVD and BOR \n ?4-to-26 MHz crystal oscillator \n ?Internal 16 MHz factory-trimmed RC \n ?32 kHz oscillator for RTC with calibration \n ?Internal 32 kHz RC with calibration \n? Power consumption \n ?Run: 146 μA/MHz (peripheral off) \n ?Stop (Flash in Stop mode, fast wakeup time): 42 μA Typ @ 25C; 65 μA max @25 °C \n ?Stop (Flash in Deep power down mode, fast wakeup time): down to 10 μA @ 25 °C; 30 μA max @25 °C \n ?Standby: 2.4 μA @25 °C / 1.7 V without RTC; 12 μA @85 °C @1.7 V \n ?VBATsupply for RTC: 1 μA @25 °C \n? 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels \n? General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support \n? Up to 11 timers: up to six 16-bit, two 32-bit timers up to 84 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer? Debug mode \n ?Serial wire debug (SWD) & JTAG interfaces \n ?Cortex?-M4 Embedded Trace Macrocell? \n? Up to 81 I/O ports with interrupt capability \n ?Up to 78 fast I/Os up to 42 MHz \n ?All I/O ports are 5 V-tolerant \n? Up to 12 communication interfaces \n ?Up to 3 x I2C interfaces (SMBus/PMBus) \n ?Up to 3 USARTs (2 x 10.5 Mbit/s, 1 x 5.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control) \n ?Up to 4 SPIs (up to 42Mbit/s at fCPU= 84 MHz), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock \n ?SDIO interface \n ?Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY \n? CRC calculation unit \n? 96-bit unique ID \n? RTC: subsecond accuracy, hardware calendar \n? All packages (WLCSP49, LQFP64/100, UFQFPN48, UFBGA100) are ECOPACK?2;

The STM32F401xD/xE devices are based on the high-performance ARM?Cortex? -M4 32-bit RISC core operating at a frequency of up to 84 MHz. Its Cortex?-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.\n\n The STM32F401xD/xE incorporate high-speed embedded memories (512 Kbytes of Flash memory, 96 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.\n\n All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.\n\n

STM32F401VE

Up to 12 communication interfaces

STM32F401VE

Clock, reset and supply management

STM32F401XB

ARMCortex-M432bMCUFPU,105DMIPS,256KBFlash/64KBRAM,11TIMs,1ADC,11comm.interfaces

STM32F401XD

Clock,resetandsupplymanagement

STM32F401xE

Clock,resetandsupplymanagement