STM32L151R6數(shù)據(jù)手冊ST中文資料規(guī)格書

描述 Description

The ultra-low-power STM32L151x6/8/B and STM32L152x6/8/B devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM?Cortex?-M3 32-bit RISC core operating at 32 MHz frequency (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes and RAM up to 16 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

All the devices offer a 12-bit ADC, 2 DACs and 2 ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L151x6/8/B and STM32L152x6/8/B devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB. The STM32L151x6/8/B and STM32L152x6/8/B devices offer up to 20 capacitive sensing channels to simply add touch sensing functionality to any application.

They also include a real-time clock and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller (except STM32L151x6/8/B devices) has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.

The ultra-low-power STM32L151x6/8/B and STM32L152x6/8/B devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. It is available in the -40 to +85 °C temperature range, extended to 105°C in low power dissipation state. A comprehensive set of power-saving modes allows the design of low-power applications.

特性 Features

? Ultra-low-power platform
?1.65 V to 3.6 V power supply
?-40°C to 85°C/105°C temperature range
?0.3 μA Standby mode (3 wakeup pins)
?0.9 μA Standby mode + RTC
?0.57 μA Stop mode (16 wakeup lines)
?1.2 μA Stop mode + RTC
?9 μA Low-power run mode
?214 μA/MHz Run mode
?10 nA ultra-low I/O leakage
?< 8 μs wakeup time
? Core: ARM?Cortex?-M3 32-bit CPU
?From 32 kHz up to 32 MHz max
?1.25 DMIPS/MHz (Dhrystone 2.1)
?Memory protection unit
? Reset and supply management
?Ultra-safe, low-power BOR (brownout reset) with 5 selectable thresholds
?Ultra-low-power POR/PDR
?Programmable voltage detector (PVD)
? Clock sources
?1 to 24 MHz crystal oscillator
?32 kHz oscillator for RTC with calibration
?High Speed Internal 16 MHz factory-trimmed RC (+/- 1%)
?Internal low-power 37 kHz RC
?Internal multispeed low-power 65 kHz to 4.2 MHz
?PLL for CPU clock and USB (48 MHz)
? Pre-programmed bootloader
?USART supported
? Development support
?Serial wire debug supported
?JTAG and trace supported
? Up to 83 fast I/Os (73 I/Os 5V tolerant), all mappable on 16 external interrupt vectors
? Memories
?Up to 128 Kbytes Flash memory with ECC
?Up to 16 Kbytes RAM
?Up to 4 Kbytes of true EEPROM with ECC
?80-byte backup register
? LCD Driver (except STM32L151x/6/8/B devices) for up to 8x40 segments
?Support contrast adjustment
?Support blinking mode
?Step-up converter on board
? Rich analog peripherals (down to 1.8 V)
?12-bit ADC 1 Msps up to 24 channels
?12-bit DAC 2 channels with output buffers
?2x ultra-low-power-comparators(window mode and wake up capability)
? DMA controller 7x channels
? 8x peripheral communication interfaces
?1x USB 2.0 (internal 48 MHz PLL)
?3x USARTs (ISO 7816, IrDA)
?2x SPIs 16 Mbit/s
?2x I2Cs (SMBus/PMBus)
? 10x timers: 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window)
? Up to 20 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
? CRC calculation unit, 96-bit unique ID