STR485集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

STR485屬于集成電路（IC）的驅動器接收器收發器。由意法半導體集團制造生產的STR485驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Features

? Half-duplex RS485 transceiver

? 1.65 V to 3.6 V supply for data and enable signals

? 3 V to 3.6 V supply for bus supply

? High speed: up to 20 Mbps data rate

? Low speed selected by SLR pin : 250 kbps

? Up to 256 transceivers on the bus

? Fail safe receiver (bus open, idle and shorted)

? Thermal shutdown protection

? Low quiescent current in shutdown mode

? Extended temperature range : -40 °C to +105 °C

? Available in industry standard DFN10

? Bus-pin protection more than:

– ±4 kV HBM protection

– ±8 kV IEC61000-4-2 contact discharge

– ±16 kV IEC61000-4-2 air discharge

– Compliant IEC61000-4-4 fast transient burst Class B

Description

The STR485 is a low power differential line transceiver for data transmission

standard RS485 applications in half-duplex mode. Data and enable signals are

compatible with 1.8 V or 3.3 V supplies.

Two speeds are selectable through SLR pin: fast data rate up to 20 Mbps or slow

data rate for extended cable running to 250 kbps.

Excessive power dissipation caused by bus contention or faults is prevented by

thermal shutdown circuit that forces the driver outputs into a high impedance state.

The receiver has a fail-safe feature, which guarantees a high output state when the

inputs are left open, shorted or idle.