TAS5342L

100 W STEREO DIGITAL AMPLIFIER POWER STAGE

TAS5342L

100 W STEREO DIGITAL AMPLIFIER POWER STAGE;

TAS5342LA

具有低 RDSon 的 100W 立體聲、200W 單聲道、0V 至 34V 電源電壓、PWM 輸入開環(huán) D 類音頻放大器; ? Total Power Output (Bridge Tied Load) \n? 2 × 100 W at 10% THD+N Into 4 Ω\n? 2 × 80 W at 10% THD+N Into 6 Ω\n? 2 × 65 W at 10% THD+N Into 8 Ω\n \n? Total Power Output (Single Ended) \n? 4 × 40 W at 10% THD+N Into 3 Ω\n? 4 × 30 W at 10% THD+N Into 4 Ω\n \n? Total Power Output (Parallel Mode) \n? 1 × 200 W at 10% THD+N Into 2 Ω\n? 1 × 160 W at 10% THD+N Into 3 Ω\n \n? >110 dB SNR (A-Weighted With TAS5518 Modulator)\n? \n? Standalone Protection Recovery\n? Power-On Reset (POR) to Eliminate System Power-Supply Sequencing\n? High-Efficiency Power Stage (>90%) With 110-mΩ Output MOSFETs\n? Thermally Enhanced Package 44-Pin HTSSOP (DDV)\n? Error Reporting, 3.3-V and 5-V Compliant\n? EMI Compliant When Used With Recommended System Design;

The TAS5342LA is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4-Ω bridge-tied load (BTL) at up to 100 W per channel with low-harmonic distortion, low-integrated noise, and low-idle current. The TAS5342LA has a complete protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These protection features are short-circuit protection, over-current protection, under voltage protection, over temperature protection, and a loss of PWM signal (PWM activity detector). A power-on-reset (POR) circuit is used to eliminate power-supply sequencing that is required for most power-stage designs.

TAS5342LA

100 W STEREO DIGITAL AMPLIFIER POWER STAGE

TAS5342LADDV

100 W STEREO DIGITAL AMPLIFIER POWER STAGE

TAS5342LADDVR

100 W STEREO DIGITAL AMPLIFIER POWER STAGE

TAS5342LDDV

100 W STEREO DIGITAL AMPLIFIER POWER STAGE

TAS5342LDDVG4

100 W STEREO DIGITAL AMPLIFIER POWER STAGE

TAS5342LDDVR

100 W STEREO DIGITAL AMPLIFIER POWER STAGE

TAS5342LDDVRG4

100 W STEREO DIGITAL AMPLIFIER POWER STAGE