TCANC3403-Q1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? AEC-Q100 Qualified for automotive applications

? 3.3V Single supply operation

– Eliminates the 5V regulator saving BOM cost

and reducing PCB space

? Excellent EMC operation in homogeneous and

heterogeneous networks

? Compatible with the requirements of ISO

11898-2:2016 physical layer standard

? Functional Safety-Capable

– Documentation available to aid in functional

safety system design

? Support of classical CAN and optimized CAN FD

performance at 2, 5, and 8Mbps

– Short and symmetrical propagation delays for

enhanced timing margin

? TCANC3403-Q1: I/O voltage range supports:

1.7V to 3.6V

? Receiver common mode input voltage: ±30V

? Protection features:

– Bus fault protection: ±58V

– ISO 10605 ESD on bus pins: ±8kV

– Undervoltage protection

– TXD-dominant time-out (DTO)

– Thermal-shutdown protection (TSD)

? Operating modes:

– Normal mode

– Low power standby mode supporting remote

wake-up request

– Ultra-low power shutdown mode:

TCANC3404-Q1 only

? Optimized behavior when unpowered

– Bus and logic pins are high impedance (no load

to operating bus or application)

– Hot-plug capable: power up or down glitch-free

operation on bus and RXD output

? 8-Pin SOIC, small footprint SOT-23 and lead

less VSON-8 package with wettable flanks for

automated optical inspection (AOI)

2 Applications

? Automotive and transportation

– Body control modules

– Automotive gateway

– Advanced driver assistance system (ADAS)

– Infotainment

3 Description

The TCANC3403-Q1 and TCANC3404-Q1 are 3.3V

controller area network (CAN) FD transceivers that

are compatible with the physical layer requirements of

the ISO 11898-2:2016 high-speed CAN specification.

The transceivers have certified electromagnetic

compatibility (EMC) operation for use with classical

CAN and CAN FD networks up to 5 megabits

per second (Mbps). Up to 8Mbps operation in

simpler networks is possible with these devices.

The TCANC3403-Q1 includes an internal logic level

translation through the VIO pin, allowing the direct

interface of the transceiver I/Os to 1.8V, 2.5V, or

3.3V logic levels. The TCANC3404-Q1 has shutdown

feature where all blocks are powered off and device

enters ultra-low power consumption mode. The

transceivers support a low-power standby mode, and

a wake over CAN which is compliant to the ISO

11898-2:2016 defined wake-up pattern (WUP).

The transceivers include thermal-shutdown (TSD),

TXD-dominant time-out (DTO) and supply

undervoltage detection. The devices have defined

fail-safe behavior in supply undervoltage or floating

pin scenarios. These devices are available in industrystandard

SOIC-8, the VSON-8, and a space-saving

small footprint SOT-23 packages.