TCPP02-M18電路保護的電涌抑制IC規格書PDF中文資料

TCPP02-M18屬于電路保護的電涌抑制IC。由意法半導體集團制造生產的TCPP02-M18電涌抑制 IC電涌抑制 IC 可用于為電氣設備提供過壓和/或過流保護。該系列中的元器件采用半導體材料設計。特征包括鉗位電壓、技術、電路數、應用和安裝類型。技術是外部或內部開關，電路數為 1、2、3 或 4。目標應用是汽車、以太網、通用、便攜式設備、SLIC、USB、USB OTG 等。

Features

Externally programmable VBUS over current protection (OCP)

Integrated charge pump and gate driver for external N-channel MOSFET

VBUS current sense and amplifier with analog output

Integrated discharge on VBUS and VCONN

Over temperature protection

Over voltage protection (OVP) on CC lines against short-to-VBUS

VCONN OCP (100 mW max), OVP (6 V max)

ESD protection for CC1, CC2, compliant with IEC 61000-4-2 Level 4 (±8 kV

contact discharge, ±15 kV air discharge)

Compliant with PPS (programmable power supply)

I2C communication, with two I2C addresses available

Junction temperature from -40 °C to 125 °C

Compliant with USB-C power delivery standard 3.1, standard power range

(SPR), up to 100 W

ECOPACK2 compliant

Applications

USB-C chargers, adapters, power sharing adapters, battery charger

Wall plugs, car charger, PoE to USB-C adapter, power bank

Desktop, monitor, docking, USB hub, dual-port charger

Description

The TCPP02-M18 is a MCU companion chip enabling cost-effective USB-C source

solution. It provides protections and functionalities to safely comply with the USB-C

specification.

On provider path, TCPP02-M18 drives external N-channel MOSFET to ensure

overcurrent protection on VBUS pin, as well as a discharge path. It features an

analog current sense and amplifier with an output accessible for a MCU ADC, thus

minimizing system cost.

The TCPP02-M18 features 24 V tolerant ESD protection as per IEC61000-4-2 level

4 on USB Type-C? connector communication channel pins (CC). Also, it provides

overvoltage protection on CC1 and CC2 pins when these pins are subjected to short

circuit with the VBUS pin that may happen when removing the USB Type-C? cable

from its receptacle.

TCPP02-M18 embeds I2C slave registers with two possible addresses, ideal for

dual-port chargers or multiple port applications.