THVD2412V中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Meets or exceeds the requirements of the TIA/

EIA-485A and TIA/EIA-422B standards

? 3V to 5.5V RS-485 supply voltage

? Differential output exceeds 2.1V for PROFIBUS

compatibility with 5V supply

? 1.65V to 5.5V Supply for logic signal interface

? SLR Pin Selectable Data Rates:

– THVD2410V, THVD2412V: 250kbps and

1Mbps

– THVD2450V, THVD2452V: 20Mbps and

50Mbps

? Bus I/O protection

– ±70V DC bus fault

– ±16kV HBM ESD

– Half duplex devices: ±15kV IEC 61000-4-2

contact and air-gap discharge

– Full duplex devices: ±8kV IEC 61000-4-2

contact and air-gap discharge

– ±4kV IEC 61000-4-4 fast transient burst

? Half-duplex and Full-Duplex devices available in

two speed grades

? Extended ambient temperature range: -40°C to

125°C

? Extended operational common-mode range: ±25V

? Enhanced receiver hysteresis for noise immunity

? Low power consumption

– Low shutdown supply current: < 5μA

– Quiescent current during operation: < 5.3mA

? Glitch-free power-up/down for hot plug-in capability

? Open, short, and idle bus failsafe

? Thermal shutdown

? 1/8 unit load (up to 256 bus nodes) in -7V to 12V

common mode range

? Small 3mm x 3mm VSON package to save board

space, or 14-SOIC for drop-in compatibility

2 Applications

? Motor drives

? Factory automation and control

? HVAC systems

? Building automation

? Grid infrastructure

? Electricity meters

? Process analytics

? Video surveillance

3 Description

THVD24xxV are ±70V fault-protected, half and fullduplex

RS-422/RS-485 transceivers using a 1.65V to

5.5V supply for logic signal interface, and a 3V to 5.5V

bus side supply. These devices have slew rate select

feature that enables them to be used at two maximum

speeds based on the SLR pin setting.

These devices feature integrated IEC ESD

protection, eliminating the need for external

system-level protection components. Extended ±25V

input common-mode range makes reliable data

communication over longer cable run lengths and/or

in the presence of large ground loop voltages.

Enhanced 250-mV receiver hysteresis provides high

noise rejection. In addition, the receiver fail-safe

feature makes sure of a logic high when the inputs

are open or shorted together.