TMAG5111B4AQDBVRQ1傳感器變送器的磁性傳感器-開關（固態）規格書PDF中文資料

TMAG5111B4AQDBVRQ1屬于傳感器變送器的磁性傳感器-開關（固態）。由德州儀器制造生產的TMAG5111B4AQDBVRQ1磁性傳感器 - 開關（固態）該系列產品使用固態技術來檢測是否存在超過某個特定幅度和/或標示的磁場，并提供指示是否存在此類磁場的雙態輸出。它們與磁簧開關以及線性或羅盤型固態器件不同，前者通過使用移動機械部件來提供類似的功能，后者提供指示所施加磁場的強度和/或方向的可變輸出。

1 Features

? AEC-Q100 qualified with the following results:

– Device temperature grade 1: –40°C to 125°C

ambient operating temperature range

– Device HBM ESD classification Level H3A

– Device CDM ESD classification Level C6

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? 2D sensing with planar and vertical hall sensors

? Inherent quadrature independent of magnet

alignment or magnet pole pitch

? Two functional options available:

– TMAG5110-Q1: independent 2D outputs

– TMAG5111-Q1: speed and direction outputs

? Ultra-high magnetic sensitivity:

– TMAG511xx2-Q1: ±1.4mT (typical)

– TMAG511xx4-Q1: ±3mT (typical)

? Fast 40kHz sensing bandwidth

? 2.5V to 38V operating VCC range

? Open-drain output (10mA sink)

? Wide ambient operating temperature range:

– –40°C to +125°C

? Protection features

– Reverse supply protection (up to –20V)

– Device survives up to 40V

– Output short-circuit protection

– Output current limitation

2 Applications

? Incremental rotary encoding

? Linear speed and direction control

– Roof and trunk motor control

– Window and door motor control

? Angular position detection

– Knob control (radio and climate control)

– Electronic power steering

– Fluid measurement

? Angular speed and direction

– Electric pumps

– Fans

– Wheel and motor speed

3 Description

The TMAG5110-Q1 and TMAG5111-Q1 are

2-dimensional, dual Hall-effect latches operating from

a 2.5V to 38V power supply. Designed for highspeed

and high-temperature motor applications, these

devices are optimized for applications leveraging

rotating magnets. Integrating two sensors and two

separate signal chains the TMAG511x-Q1 offers

two independent digital outputs giving speed and

direction calculation (TMAG5111-Q1) or giving directly

the digital output of each independent latches

(TMAG5110-Q1). This high level of integration allows

the use of a single TMAG511x-Q1 device instead of

two separate latches.

The device is offered in a standard 3mT operating

point, as well as a high-sensitivity 1.4mT operating

point. The higher magnetic sensitivity provides

flexibility in low-cost magnet selection and mechanical

component placement. The TMAG511x-Q1 is also

available in three 2-axis combination options (X-Y,

Z-X, Z-Y) to allow flexible placement of the sensor

relative to the magnet.

The device performs consistently across a wide

ambient temperature range of –40°C to +125°C.