TPS611

Bipolar Small-Signal Transistors

MOSGT30F12630F12630A/330VIGBTTO-220F Toshiba30F126GT30F126 Referencesite:http://monitor.net.ru/forum/30f126-info-494727.html ReferencePDF(30F124,30F125,30F127,30F128,30F131) :http://pdf.datasheetbank.com/pdf/Toshiba/190505.pdf

TPS611

FOR PHOTO SENSOR

Lead(Pb)-Free PhotoelectricCounter VariousKindsOfReaders PositionDetection ?φ5mmepoxyresinpackage(black) ?Highsensitivity:IL=120μA(typ.) ?Halfvalueangle:θ1/2=±8°(typ.) ?Protectedfromexternallightbyblackmoldpackaging.

TPS611

Phototransistor;

Application Scope：Opto-electronic switch\nVisible ray cut：Available\nRoHS Compatible Product(s) (#)：Available\n

TPS611

Silicon NPN Epitaxial Planar

TPS61100

適用于單節/兩節電池應用的雙路輸出轉換器（升壓直流/直流 + LDO）; ? Synchronous 95% Efficient Boost Converter\n? Integrated 120 mA LDO for Second Output Voltage\n? TSSOP-20 and QFN-24 Package\n? 65 μA (Typ) Total Device Quiescent Current\n? 0.8 V to 3.3 V Input Voltage Range\n? Adjustable Output Voltage up to 5.5 V and Fixed Output Voltage Options\n? Power-Save Mode for Improved Efficiency at Low Output Power\n? Battery Supervision\n? Power Good Output\n? Pushbutton Function for Start-Up\n? Low EMI-Converter (Integrated Antiringing Switch)\n? Load Disconnect During Shutdown\n? Auto Discharge Allows the Device to Discharge Output Capacitor During Shutdown\n? Overtemperature Protection\n? EVM Available (TPS6110XEVM-216)\n? APPLICATIONS \n? All Single or Dual Cell Battery Operated Products Which Use Two System Voltages Like DSP C5X Applications\n? Internet Audio Player, PDAs, Digital Still Cameras and Other Portable Equipment;

The TPS6110x devices provide a complete power supply solution for products powered by either one or two Alkaline, NiCd, or NiMH battery cells. The converter generates two stable output voltages that are either adjusted by an external resistor divider or fixed internally on the chip. It stays in operation with supply voltages down to 0.8 V. The implemented boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency.\n\nThe maximum peak current in the boost switch is limited to a value of 1800 mA.\n\nThe converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. An auto discharge function allows discharging the output capacitors during shutdown mode. This is especially useful in microcontroller applications where the microcontroller or microprocessor should not remain active due to the stored voltage on the output capacitors. Programming the ADEN-pin disables this feature. A low-EMI mode is implemented to reduce ringing and in effect lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode. A power good output at the boost stage provides additional control of cascaded power supply components.\n\n The built-in LDO can be used for a second output voltage derived either from the boost output or directly from the battery. The output voltage of this LDO can be programmed by an external resistor divider or is fixed internally on the chip. The LDO can be enabled separately i.e., using the power good of the boost stage.\n\n The device is packaged in a 20-pin TSSOP (20 PW) package or in a 24-pin QFN (24 RGE) package.

TPS61107

適用于單節/兩節電池應用、具有 1.8V 固定輸出電壓的雙路輸出轉換器（升壓直流/直流 + LDO）; ? Synchronous 95% Efficient Boost Converter\n? Integrated 120 mA LDO for Second Output Voltage\n? TSSOP-20 and QFN-24 Package\n? 65 μA (Typ) Total Device Quiescent Current\n? 0.8 V to 3.3 V Input Voltage Range\n? Adjustable Output Voltage up to 5.5 V and Fixed Output Voltage Options\n? Power-Save Mode for Improved Efficiency at Low Output Power\n? Battery Supervision\n? Power Good Output\n? Pushbutton Function for Start-Up\n? Low EMI-Converter (Integrated Antiringing Switch)\n? Load Disconnect During Shutdown\n? Auto Discharge Allows the Device to Discharge Output Capacitor During Shutdown\n? Overtemperature Protection\n? EVM Available (TPS6110XEVM-216)\n? APPLICATIONS \n? All Single or Dual Cell Battery Operated Products Which Use Two System Voltages Like DSP C5X Applications\n? Internet Audio Player, PDAs, Digital Still Cameras and Other Portable Equipment;

The TPS6110x devices provide a complete power supply solution for products powered by either one or two Alkaline, NiCd, or NiMH battery cells. The converter generates two stable output voltages that are either adjusted by an external resistor divider or fixed internally on the chip. It stays in operation with supply voltages down to 0.8 V. The implemented boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency.\n\nThe maximum peak current in the boost switch is limited to a value of 1800 mA.\n\nThe converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. An auto discharge function allows discharging the output capacitors during shutdown mode. This is especially useful in microcontroller applications where the microcontroller or microprocessor should not remain active due to the stored voltage on the output capacitors. Programming the ADEN-pin disables this feature. A low-EMI mode is implemented to reduce ringing and in effect lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode. A power good output at the boost stage provides additional control of cascaded power supply components.\n\n The built-in LDO can be used for a second output voltage derived either from the boost output or directly from the battery. The output voltage of this LDO can be programmed by an external resistor divider or is fixed internally on the chip. The LDO can be enabled separately i.e., using the power good of the boost stage.\n\n The device is packaged in a 20-pin TSSOP (20 PW) package or in a 24-pin QFN (24 RGE) package.

TPS61161DRVR

產品種類：LED照明驅動器輸入電壓：2.7 V to 18 V最大工作溫度：+ 85 C安裝風格：SMD/SMT封裝 / 箱體：SON-6商標：Texas Instruments高電平輸出電流：100 uA低電平輸出電流：100 uA最小工作溫度：- 40 C封裝：Reel功率耗散：1540 mW系列：TPS61161工廠包裝數量：3000

TPS611_07

Silicon NPN Epitaxial Planar

TPS61100

DUAL-OUTPUT, SINGLE-CELL BOOST CONVERTER

TPS61100

DUAL-OUTPUT, SINGLE-CELL BOOST CONVERTER