UCC27200

具有 8V UVLO 和 CMOS 輸入的 3A、120V 半橋柵極驅動器

The UCC2720x family of high-frequency N-channel MOSFET drivers include a 120-V bootstrap diode and high-side and low-side drivers with independent inputs for maximum control flexibility. This allows for N-channel MOSFET control in half-bridge, full-bridge, two-switch forward, and active clamp forwar; ? Drives Two N-Channel MOSFETs in High-Side and Low-Side Configuration\n? Negative Voltage Handling on HS (–5 V)\n? Maximum Boot Voltage of 120 V\n? Maximum VDD Voltage of 20 V\n? On-Chip 0.65-V VF, 0.6-Ω RD Bootstrap Diode\n? Greater than 1 MHz of Operation\n? 20-ns Propagation Delay Times\n? 3-A S;

UCC27200

120-V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

UCC27200

120-V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

UCC27200

120V Boot, 3A Peak, High Frequency, High-Side and Low-Side Driver

UCC27200A

具有 8V UVLO、負電壓處理能力和 CMOS 輸入的 3A、120V 半橋柵極驅動器

UCC2720xA 系列高頻 N 溝道 MOSFET 驅動器由 120V 自舉二極管和高側/低側驅動器組成，其中高側/低側驅動器配有獨立輸入，可最大限度提高控制靈活性。這可在半橋轉換器、全橋轉換器、雙開關正激轉換器和有源鉗位正激轉換器中實現 N 溝道 MOSFET 控制。低側和高側柵極驅動器是獨立控制的，并在彼此的接通和關斷之間實現了 1ns 的延遲匹配。UCC2720xA 基于常見的 UCC27200/1 驅動器，但提供了一些增強功能。UCC2720xA 具有增強型 ESD 輸入結構并且其 HS 引腳最高能夠承受 -18V 電壓，這使得其在嘈雜電源環境下的性能得到了改善。 由于在芯片上集成了; ? 可驅動兩個采用高側和低側配置的 N 溝道金屬氧化物半導體場效應晶體管 (MOSFET)\n? HS 引腳具備 -18V 的負電壓處理能力\n? 最大啟動電壓：120V\n? 最大 VDD 電壓：20V\n? 片載0.65V VF， 0.6Ω RD 自舉二極管\n? 工作頻率高于 1MHz\n? 20ns 傳播延遲時間\n? 3A 吸收，3A 供電輸出電流\n? 8ns 上升 / 7ns 下降時間 （采用 1000pF 負載時）\n? 1ns 延遲匹配\n? 用于高側和低側驅動器的欠壓鎖定功能 \n? 提供 8 引腳小外形尺寸集成電路 (SOIC) (D)、 PowerPADSOIC-8 (;

UCC27200-Q1

具有 8V UVLO 和 CMOS 輸入的汽車類 3A、120V 半橋柵極驅動器

The UCC2720x-Q1 family of high-frequency N-channel MOSFET drivers include a 120-V bootstrap diode and high-side and low-side drivers with independent inputs for maximum control flexibility. This allows for N-channel MOSFET control in half-bridge, full-bridge, two-switch forward, and active-clamp for; ? Qualified for Automotive Applications\n? AEC-Q100 Qualified With the Following Results: \n? Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range\n? Device HBM ESD Classification Level 2\n? Device CDM ESD Classification Level C5\n \n? Drives Two N-Channel MOSFETs in High;

UCC27200_07

120-V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

UCC27200_12

120-V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

UCC27200_15

120-V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

UCC27200_16

120V Boot, 3A Peak, High Frequency, High-Side and Low-Side Driver