W9751G6JB-25中文資料華邦電子數(shù)據(jù)手冊PDF規(guī)格書

1. GENERAL DESCRIPTION

The W9751G6JB is a 512M bits DDR2 SDRAM, organized as 8,388,608 words 4 banks 16 bits. This device achieves high speed transfer rates up to 1066Mb/sec/pin (DDR2-1066) for various applications. W9751G6JB is sorted into the following speed grades: -18, -25, 25I, 25A, 25K and -3. The -18 grade parts is compliant to the DDR2-1066 (7-7-7) specification. The -25/25I/25A/25K grade parts are compliant to the DDR2-800 (5-5-5) or DDR2-800 (6-6-6) specification (the 25I industrial grade parts which is guaranteed to support -40°C ≤ TCASE ≤ 95°C). The -3 grade parts is compliant to the DDR2-667 (5-5-5) specification.

2. FEATURES

? Power Supply: VDD, VDDQ = 1.8 V ? 0.1V

? Double Data Rate architecture: two data transfers per clock cycle

? CAS Latency: 3, 4, 5, 6 and 7

? Burst Length: 4 and 8

? Bi-directional, differential data strobes (DQS and DQS ) are transmitted / received with data

? Edge-aligned with Read data and center-aligned with Write data

? DLL aligns DQ and DQS transitions with clock

? Differential clock inputs (CLK and CLK )

? Data masks (DM) for write data

? Commands entered on each positive CLK edge, data and data mask are referenced to both edges of DQS

? Posted CAS programmable additive latency supported to make command and data bus efficiency

? Read Latency = Additive Latency plus CAS Latency (RL = AL + CL)

? Off-Chip-Driver impedance adjustment (OCD) and On-Die-Termination (ODT) for better signal quality

? Auto-precharge operation for read and write bursts

? Auto Refresh and Self Refresh modes

? Precharged Power Down and Active Power Down

? Write Data Mask

? Write Latency = Read Latency - 1 (WL = RL - 1)

? Interface: SSTL_18

? Packaged in WBGA 84 Ball (8X12.5 mm2), using Lead free materials with RoHS compliant